| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| What do i need for pcp to refill the cylinders https://www.airgunforum.ca/forums/topic93593-30.html |
Page 3 of 3 |
| Author: | wesb2007 [ Fri May 12, 2023 8:54 am ] |
| Post subject: | Re: What do i need for pcp to refill the cylinders |
If you are buying a match air rifle like the Feinwerkbau, then just buying a hand pump won't work unless you get an adapter. Most of these match guns are made to remove the air cylinder for filling directly from a scuba tank and they have cga threads that screw directly into a scuba tank valve. So you would need to get an adapter that goes from those threads to a male quick connect. I have some adapters here in my shop if you do end up getting the gun. I have hand pumps for sale as well. (airgunarcheryfun.ca) Thanks, Wes Sent from my SM-A536W using Tapatalk |
|
| Author: | Hunter34 [ Sat May 13, 2023 10:44 am ] |
| Post subject: | Re: What do i need for pcp to refill the cylinders |
I’ve purchased my second used SCBA 4500 psi tank from a company in Edmonton I believe or somewhere around there. Both tanks were in great shape with around 3 years life remaining. It cost right around $200-250 shipped to NB with fresh hydro. 2 different scuba shops fill it to around 4200 psi for $10. The 60 minute tank I have now fills my Airguns many many times so to me it’s been well worth it. |
|
| Page 3 of 3 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|