Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
22xx BNM breech https://www.airgunforum.ca/forums/topic50938.html |
Page 1 of 3 |
Author: | paddyfritz [ Mon Nov 19, 2012 12:16 pm ] |
Post subject: | 22xx BNM breech |
Adding a BNM breach to my 2260. Have to refit the handguard to match the new breach and since the barrel is higher, it needs a shroud. Just starting to make everything. This is what is used to look like. |
Author: | sholo [ Mon Nov 19, 2012 3:45 pm ] |
Post subject: | Re: 22xx BNM breech |
Looks awesome, Paddy! Can't wait to order one myself... Todd |
Author: | paddyfritz [ Tue Nov 20, 2012 2:21 am ] |
Post subject: | Re: 22xx BNM breech |
sholo wrote: Looks awesome, Paddy! Can't wait to order one myself... Todd Its a heavy duty breech for sure. |
Author: | paddyfritz [ Tue Nov 20, 2012 12:13 pm ] |
Post subject: | Re: 22xx BNM breech |
some progress |
Author: | Plasticman [ Wed Nov 21, 2012 8:27 pm ] |
Post subject: | Re: 22xx BNM breech |
Paddyfritz are you leaving the barrel free floating or are you going to put on a band? |
Author: | Adolfo [ Wed Nov 21, 2012 9:41 pm ] |
Post subject: | Re: 22xx BNM breech |
nice looking gun, i have the same breech, but my shroud is made of carbon fiber, but i haven't install it yet because i need something for the end (muzzle side) to hold the shroud, i want to use a muzzle break that i have but it doesn't fit inside for a 1mm that i need to shave off from the muzzle break |
Author: | paddyfritz [ Thu Nov 22, 2012 2:19 am ] |
Post subject: | Re: 22xx BNM breech |
Plasticman wrote: Paddyfritz are you leaving the barrel free floating or are you going to put on a band? I need to make a band for it. Perhaps this weekend. |
Author: | Adolfo [ Sun Jan 20, 2013 2:15 pm ] |
Post subject: | Re: 22xx BNM breech |
i know this is a little old post but any progress on the gun? im putting a carbon fibre "shroud" on mine, but at the muzzle end its gonna have a aluminium muzzle brake, i havent finished it yet but i have a few pics, the muzzle brake needts to be shave a little bit so i will be able to put half of the brake in to the CF tube |
Author: | walther [ Sun Jan 20, 2013 3:07 pm ] |
Post subject: | 22xx BNM breech |
Hey any updates, I've been eyeing that breech for awhile. I want to finally build a 2240. |
Author: | rrdstarr [ Sun Jan 20, 2013 3:37 pm ] |
Post subject: | Re: 22xx BNM breech |
SO where are you guys getting the breech from? I have my BlueFork on order from Idaho. What source are you getting the CF tube from? All I could find was a guy on FleaBay in the UK with some oddball lengths from a bike build? Thanks, Rick |
Author: | Adolfo [ Sun Jan 20, 2013 5:44 pm ] |
Post subject: | Re: 22xx BNM breech |
I don't remember where I got it from, but it was from a website from.. Germany I think, the seller makes the tube for aircraft part? I think they are for those small planes that look and fly like the real planes the breech you can get it from here http://bnm111.hpage.co.in/breeches_avai ... 03259.html |
Author: | paddyfritz [ Sun Jan 20, 2013 8:59 pm ] |
Post subject: | Re: 22xx BNM breech |
I haven't made a barrel band for mine yet. Have not had much time for building, and when I do have a bit of time the wife has been sleeping. Cant make too much noise or I will face her wrath. |
Author: | walther [ Mon Jan 21, 2013 11:14 am ] |
Post subject: | 22xx BNM breech |
How's the quality of those bnm breeches btw? |
Author: | rrdstarr [ Mon Jan 21, 2013 11:36 am ] |
Post subject: | Re: 22xx BNM breech |
PaddyFritz, I saw the breeches and saw you could get one with a 10 shot magazine! Does yours have that option? Thinking of ordering one in the next few days. Actually I am seriously thinking of taking the plastic Crosman breech to work and making all the measurements and make one there from Aluminum. You must have some machines at home to do the work you are doing? I can do the work I need to do after work hours. I am an Aviation machinist by trade. Thanks, Rick |
Author: | Adolfo [ Mon Jan 21, 2013 11:42 am ] |
Post subject: | Re: 22xx BNM breech |
rrdstarr wrote: PaddyFritz, I saw the breeches and saw you could get one with a 10 shot magazine! Does yours have that option? Thinking of ordering one in the next few days. Actually I am seriously thinking of taking the plastic Crosman breech to work and making all the measurements and make one there from Aluminum. You must have some machines at home to do the work you are doing? I can do the work I need to do after work hours. I am an Aviation machinist by trade. Thanks, Rick Paddyfritz breech is almost like mine and I'm sure his takes the 10 shot round magazines mine does, they are not in the picture but I have two magazines also my breech can be use left handed or right handed the bold handle goes at the back of the breech not on the side and mine has the weaver rail |
Page 1 of 3 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |