Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Umarex Walther lever action 12gr part needed https://www.airgunforum.ca/forums/topic57847-15.html |
Page 2 of 2 |
Author: | 2240mod [ Sat Oct 12, 2013 7:02 am ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
Able seal are great people and have been there just once..a bit far. there is a place in Scarborough called Global Rubber productions. 7-515 Milner Ave. Scarborough, Ont. They have a minimum order of ca$20.00 and a bit more than Able Seal. People there at Global, not as nice. |
Author: | Plinkercases [ Sat Oct 12, 2013 9:20 am ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
I also came across Ontario Bearign who will supply O-rings. Buna only. Guy was helpful by phone. Same deal with no receipt under 2o like Able, so cash on hand. They are at 1220 Ellsemere scarboro 416 321 8701 |
Author: | KEN. [ Sat Oct 12, 2013 11:08 pm ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
The orange "o-ring" would be the end seal if it was a Crosman. Benjamin, Sheridan or some Daisy's.....if you remove the end seal from your 38T & C you'll see what I was thinking it might be like...Yours is an O-ring...KEN. |
Author: | Plinkercases [ Sat Oct 12, 2013 11:26 pm ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
I have a rebuild kit for teh 38's so I will dig up the baggie and see if they have a match in there. I would need 2 unfortunately but at least then I woudl know there was a non-umarex equivalent. Thanks Ken. |
Author: | KEN. [ Sun Oct 20, 2013 3:19 pm ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
Your's is an o-ring so I don't think the Crosman end seal would work for you....KEN. |
Author: | Plinkercases [ Sun Oct 20, 2013 4:17 pm ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
Thanks Ken. I didnt get to looking anyhow. I am waiting on Kyle from SAS to see if he can locate the right bits. meantime it seems to work with the buna rigns I fit in. As was suggested I also oil the cannister neck and be more careful inserting and removing them. |
Author: | Plinkercases [ Sat Aug 23, 2014 9:27 pm ] |
Post subject: | Re: Umarex Walther lever action 12gr part needed |
Patience and persistence have paid off along with serendipity! I was contacted about selling my Hahn super repeater by Rob from R&R Airgun repair... and turns out he is an Umarex centre...so after almost 12 month I received the correct seals from rob along with some other Umarex goodies I had been trying for a long time to locate and voila!!! ITS ALIVE!!!!! and my Umarex HPP as well. Had to alter a deep socket to get the brass seats out (left the other tool at home ) but finally popped the new proper rings in and it holds and shoot like new. Thanks million Rob for helping resurrect my favorite shooter. Now I can take it to the range Monday night. If you need Umarex stuff or repairs get ahold of Rob ...he is out west. Happy end to old thread. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |