My Gamo Compact had that problem and a couple drops of Pellgunoil in the chambre fixed my problem .
Or it could be something else .
http://www.youtube.com/watch?v=aktBRsG4q5g
| Attachments: |
|
IMG_9061.JPG [ 1.98 MiB | Viewed 1558 times ] |
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| Gamo PR 45 problem https://www.airgunforum.ca/forums/topic59606.html |
Page 1 of 1 |
| Author: | Penage Guy [ Wed Jan 01, 2014 2:50 pm ] |
| Post subject: | Gamo PR 45 problem |
My 20 year old Gamo PR 45 recently gave up the ghost. It did so in what seems like an odd way. It would shoot. Next shot, nothing. I would cock it again, and it would work. It did this a couple of times, then it stopped working. Now it doesn't hold any pressure. I've never attempted to take apart or repair any air gun (never needed any repairing until now). Anybody have any ideas on what may be wrong and how to fix it? |
|
| Author: | paddyfritz [ Wed Jan 01, 2014 3:39 pm ] |
| Post subject: | Re: Gamo PR 45 problem |
Seals ? |
|
| Author: | under500fps [ Wed Jan 01, 2014 4:05 pm ] | ||
| Post subject: | Re: Gamo PR 45 problem | ||
My Gamo Compact had that problem and a couple drops of Pellgunoil in the chambre fixed my problem . Or it could be something else . http://www.youtube.com/watch?v=aktBRsG4q5g
|
|||
| Author: | TriggerHappy416 [ Wed Jan 01, 2014 6:55 pm ] |
| Post subject: | Re: Gamo PR 45 problem |
Try the oil method suggested by under500fps first. If that doesn't work, you will probably have to replace the o-rings. Can you hear the air escaping? or is it a sear/hammer engagement problem? |
|
| Author: | Penage Guy [ Thu Jan 02, 2014 7:48 am ] |
| Post subject: | Re: Gamo PR 45 problem |
The suggestion of under500fps seems to have done it. Thank you. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|