exact same diagram
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| I am looking for a Umarex steel storm parts diagram https://www.airgunforum.ca/forums/topic60282.html |
Page 1 of 1 |
| Author: | pabirdman [ Sat Feb 01, 2014 7:03 pm ] |
| Post subject: | I am looking for a Umarex steel storm parts diagram |
does anyone have a link to one?Thanks |
|
| Author: | robipaul [ Sat Feb 01, 2014 7:24 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
here you go, click on the link and scroll down to umarex steel storm, you can then download the pdf document http://enlacesarmasdeaire.blogspot.ca/2 ... -aire.html |
|
| Author: | Adolfo [ Sat Feb 01, 2014 9:07 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
Thanks for the website, and its in spanish so i love it even more. Here is the link that will take u direct to the steel storm diagram https://dl.dropboxusercontent.com/s/5o3 ... OE0mM3nKbg |
|
| Author: | robipaul [ Sat Feb 01, 2014 9:17 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
exact same diagram
|
|
| Author: | Adolfo [ Sat Feb 01, 2014 9:22 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
Yes it is, but your link takes to the website and the link that i post takes direct to the diagram but yeah i got the link from the website that u post |
|
| Author: | Skidoo [ Tue Oct 05, 2021 11:50 am ] | ||
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram | ||
I am new to this forum and hope someone can help me repair my Steel Storm BB gun. The gun jammed and the trigger would not move. I’ve disassembled it and found a plastic pin inside the metal section with the six shooter gear assembly. I have not been able to figure out where it goes. Any help would be appreciated. Skidoo
|
|||
| Author: | Daryl [ Tue Oct 05, 2021 11:54 am ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
I clicked on that direct link and got this. Error (403) It seems you don't belong here! You should probably sign in. Check out our Help Center and forums for help, or head back to home. |
|
| Author: | Skidoo [ Tue Oct 05, 2021 12:18 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
Yeah. I am getting that same message so I am hoping someone may have the PDF that they can share with me. Thanks |
|
| Author: | Skidoo [ Tue Oct 05, 2021 3:58 pm ] | ||
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram | ||
I managed to find a photo that might help me solve my issue. I’ll post later if it helped me.
|
|||
| Author: | Skidoo [ Tue Oct 05, 2021 4:59 pm ] |
| Post subject: | Re: I am looking for a Umarex steel storm parts diagram |
Yes! That black pin goes inside the chamber with the point passing into the hole that presses up against the recoil black spring apparatus. The clue was the position in the picture where it looked like it dropped down from inside that cartridge. I used long needle nose pliers to place it into the hole located inside to the back. Flat part facing towards to nozzle end. No where did this ever come up in any documents on repairs. If your gun doesn’t fire this could be the reason. I hope this helps others. Ski |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|