Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Fri Mar 29, 2024 5:06 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Jun 09, 2014 9:08 pm 
Offline

Joined: Sat Oct 09, 2010 7:48 pm
Posts: 18
Location: Northwestern Alberta
Good day all.
Hope your summer is going well.
I am looking or some advice. I want to put dual aperture sights on my Slavia 631. Looking for some advice as to what works/fits well and why you like them.
Any pics would be great.
Thank's in advance,
Ken


Top
 Profile  
 
PostPosted: Mon Jun 09, 2014 9:39 pm 
Offline
User avatar

Joined: Sat Sep 25, 2010 7:49 pm
Posts: 1257
Location: Southern Ontario
Keep in mind, the Slavia 630/631 uses 14mm dovetails, not the standard 11mm.
This can cause some issues if you mount a scope or sights. An 11mm mount may fit, but it won't be centered. This offset means you can sight in for a set distance, (say 10m), but shooting at other distances will cause inaccuracy due to shift in the focal plane.
For scopes, BKL makes a self-centering mount which works for the wider dovetail-check here: http://www.dlairgun.com/Mounts/BKL/
Williams makes some great aperture sights...

_________________
Air and springs and CO, too


Top
 Profile  
 
PostPosted: Wed Jun 11, 2014 11:09 am 
Offline

Joined: Thu Sep 01, 2005 7:54 pm
Posts: 1800
Location: Sk.
If the gun is a later model like my 631 and 634, they may have the 11ish mm dovetail making mounting optics a much easier task. If not, a Williams FPAG will clamp on the old 14mm or 12mm rail without any canting issues. I have a couple of these sights and they are a pretty good little peep for the 631.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO