Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Fri Apr 19, 2024 3:23 am

View unanswered posts | View active topics


Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
apitagan
PostPosted: Fri Feb 06, 2015 3:14 pm 
Offline

Joined: Sat Apr 13, 2013 12:19 pm
Posts: 406
Location: Edmonton
For members who have experience with this, do you think the barrel for a 2240 be a drop in fit to the Marauder ? I'm thinking of fitting a 177 barrel to my cal 22 m-rod and thinking of getting a bolt probe which applies. Any ideas if this would work? I'll be having a rifle in 2 calibres if this works. Or would machining be needed for the proposed barrel? To add, if this is possible, any experts out there to do this?

Thanks!

_________________
Aim,hold your breath and follow through
Top
 Profile  
 
Gippeto
PostPosted: Fri Feb 06, 2015 5:49 pm 
Offline
User avatar

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 3009
Location: Canada
Not a drop in.
Top
 Profile  
 
alextermination
PostPosted: Fri Feb 06, 2015 5:52 pm 
Offline

Joined: Wed Nov 27, 2013 12:54 pm
Posts: 530
HI
I know Jezx would be able to do this. or maybe rrdstar. Good machinist those 2.

_________________
Hatsan At44 Tactical .22
Steyr hunting 5 automatic
Ruger air magnum .22
Weirhauch HW100 .22
Gamo Expomatic .177
Benjamin Marauder DougP custom stock
Theoben SlR98 .22
AlEx Custom gun .22 (JezX built masterpiece) :)
Hatsan Atp2
Top
 Profile  
 
apitagan
PostPosted: Fri Feb 06, 2015 10:09 pm 
Offline

Joined: Sat Apr 13, 2013 12:19 pm
Posts: 406
Location: Edmonton
alextermination wrote:
HI
I know Jezx would be able to do this. or maybe rrdstar. Good machinist those 2.


Thanks to both of you Alex and Gipetto! I'll try to contact the two names mentioned.

_________________
Aim,hold your breath and follow through
Top
 Profile  
 
badshot
PostPosted: Tue Feb 10, 2015 5:13 pm 
Offline

Joined: Thu Jan 08, 2009 4:20 pm
Posts: 269
Location: Markham , Ontario
Why not just buy an m-rod barrel ? It will probably be less expensive in the long run.
Top
 Profile  
 
apitagan
PostPosted: Wed Feb 11, 2015 12:36 am 
Offline

Joined: Sat Apr 13, 2013 12:19 pm
Posts: 406
Location: Edmonton
badshot wrote:
Why not just buy an m-rod barrel ? It will probably be less expensive in the long run.


Any lead where I could get one? Thanks!

_________________
Aim,hold your breath and follow through
Top
 Profile  
 
rsterne
PostPosted: Wed Feb 11, 2015 12:46 am 
Offline
User avatar

Joined: Sat Nov 03, 2007 4:19 pm
Posts: 9518
Location: Coalmont BC
You could try AirGunEric at www.scopesandammo.com ....

The barrels are the same OD, but the one for the MRod has an O-ring groove inside it instead of the O-ring being carried by the bolt.... Transfer port is in a different place as well.... The 2240 barrel is, of course, only 8" long (and .22 cal) while the MRod is 20".... Crosman do make a .177 barrel that is 24" long for the Disco that can be machined to fit the MRod if you can't get an MRod barrel....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal; Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!
Top
 Profile  
 
jezX
PostPosted: Wed Feb 11, 2015 7:28 am 
Offline
Supporting Member 2013

Joined: Wed Sep 14, 2005 8:47 pm
Posts: 1689
Location: 123 gun street Nova Scotia
the 22xx barrels are close to .434'' , and the mrod are .5'' ive done a couple barrels in the last few weeks and basicly you need cut the 22xx barrel off past the port, and thined .. then to have a sleeve pressed on and then it would fit . not a big job , but it would cost as much as buying the proper barrel... if that is possable .
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO