Canadian Airgun Forum
https://www.airgunforum.ca/forums/

1322 mod questions
https://www.airgunforum.ca/forums/topic67129.html
Page 1 of 1

Author:  TCooper [ Tue Mar 17, 2015 10:46 am ]
Post subject:  1322 mod questions

I might pick up a Cr1322 to tinker with for a while. Questions:

Can a flat top valve be made by simply machining off the cone on a factory valve? Nothing else needs to be done?

The Cr1322 is not detuned for Canada. What kind of velocity could I expect with a 14.5" and 18" barrel? Would it stay under 500fps with a factory piston? What about with a FTP?

Could a FTP be adjusted to keep velocity at 500fps with a longer 14.5" or 18" barrel?

Many thanks

Author:  Chevota [ Tue Mar 17, 2015 2:54 pm ]
Post subject:  Re: 1322 mod questions

Yes you can flatten the valve yourself, but you need to make the piston match which isn't as easy, unless you buy a ready made one which are way cool and worth it. Mine uses an O-ring and and is adjustable in length to dial it in for max pressure. I can't remember where I got mine, maybe ebay.
Here is a link to a bunch of links which may help:
http://network54.com/Forum/275684/threa ... r+New-Bees

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/