Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Dec 11, 2019 5:44 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Thu Apr 09, 2015 2:21 pm 
Offline

Joined: Wed Apr 08, 2015 10:28 pm
Posts: 1
Greetings all. It is my desire to obtain a 1322 and a 2240 Crosman from PyramydAir. I would also like to get a steel breech for each. Is this a difficult switch? And is there a chance Pyramyd would switch out the breeches for me?
I'm not lazy, I just have some nerve damage from a couple of back surgeries.
Thanks for your time. Hunter


Top
 Profile  
 
PostPosted: Thu Apr 09, 2015 2:34 pm 
Offline

Joined: Wed Jul 16, 2014 1:24 pm
Posts: 799
Location: Vancouver, BC
I know that it is quite easy on the 2240 for sure. Just takes some hex keys, and maybe 10 minutes. There are plenty of Youtube videos like this one:

https://www.youtube.com/watch?v=Cp2zDttDmFo

That give you the full instructions. It's not tough, but it's good to follow an order of operations. Once you've fully pulled apart your 2240 a few times, it becomes second nature.

_________________
Mike

FX Streamline .22 - Optisan Mamba Lite 4-16X44
Hammerli Pneuma Elite 10 .22 - Bushnell Elite 4200 4-12X40
Custom Crosman 2240 w/ LW barrel - Vortex Strikefire
Remington AirMaster 77 PAL rated - CenterPoint 3-9X40


Top
 Profile  
 
PostPosted: Thu Apr 09, 2015 3:04 pm 
Offline
User avatar

Joined: Sat Nov 03, 2012 10:42 am
Posts: 68
Location: Halton Hills, Ontario
hunter_22 wrote:
Greetings all. It is my desire to obtain a 1322 and a 2240 Crosman from PyramydAir. I would also like to get a steel breech for each. Is this a difficult switch? And is there a chance Pyramyd would switch out the breeches for me?
I'm not lazy, I just have some nerve damage from a couple of back surgeries.
Thanks for your time. Hunter

PA will install the steel breech upgrade for you, select the option at check out.


Top
 Profile  
 
PostPosted: Thu Apr 09, 2015 6:00 pm 
Offline
User avatar

Joined: Sun Feb 10, 2013 1:16 pm
Posts: 1787
You'll also need new rear sights as the stock sights don't fit the steel breech.

Are you located in the USA? If not, you may find it more cost effective to buy from one of the Canadian dealers. With the exchange rate and the tax/duties/brokerage/shipping fees buying from Pyramid adds up pretty quickly.

edit - and if you are in the states, you might want to check out the Crosman custom shop which provides a cost effective option for a customized 2240.

http://www.crosman.com/custom-shop/

Jim


Top
 Profile  
 
PostPosted: Thu Apr 09, 2015 7:35 pm 
Offline

Joined: Sun Dec 22, 2013 12:25 pm
Posts: 624
Location: New Mexico, USA
hunter_22 wrote:
Greetings all. It is my desire to obtain a 1322 and a 2240 Crosman from PyramydAir. I would also like to get a steel breech for each. Is this a difficult switch? And is there a chance Pyramyd would switch out the breeches for me?
I'm not lazy, I just have some nerve damage from a couple of back surgeries.
Thanks for your time. Hunter



Before you order you need to check out the screw location..1377s have breech screws visible as you retract the bolt and for the 2240 it's the hidden type. Also most often you need to cut the length of the top rear screw, it's the one that goes thru the rear breech cap.



http://www.network54.com/Forum/275684/t ... do+this---


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO