Canadian Airgun Forum
https://www.airgunforum.ca/forums/

2260/Disco stock screw replacement
https://www.airgunforum.ca/forums/topic71136.html
Page 1 of 1

Author:  Comrade_Zaitsev [ Fri Jan 29, 2016 12:05 pm ]
Post subject:  2260/Disco stock screw replacement

Hello all

I have just received a bunch of 22xx parts for a few projects im working on which include a 2260 trigger group and lug (i will post a thread that project later) however i forgot to order with it the screw that attaches the receiver and trigger assembly to the stock. The part number is 2260-013 i would rather not order and wait until next week to get this screw, so I am curious if anyone knows a place around Cambridge, Brantford, Paris area that one could buy a screw that would work, and if at all possible could someone tell me the dimensions and name of said screw. I apologise for the long winded explanation, however any help would be appreciated.

Cheers!

Author:  mooseslayerjc [ Fri Jan 29, 2016 12:49 pm ]
Post subject:  Re: 2260/Disco stock screw replacement

I have the disco parts list on my desktop and that same part number is on it and the description says 1/4 -20 x .625". That is a very common screw size and you can cut to length if you have a hacksaw/grinder.

Author:  Comrade_Zaitsev [ Fri Jan 29, 2016 1:32 pm ]
Post subject:  Re: 2260/Disco stock screw replacement

mooseslayerjc wrote:
I have the disco parts list on my desktop and that same part number is on it and the description says 1/4 -20 x .625". That is a very common screw size and you can cut to length if you have a hacksaw/grinder.


Does the screw head type matter?

Author:  mooseslayerjc [ Fri Jan 29, 2016 1:43 pm ]
Post subject:  Re: 2260/Disco stock screw replacement

With my disco it is a large Phillips. Off the top of my head I think it is a panhead screw.

Author:  mooseslayerjc [ Fri Jan 29, 2016 1:45 pm ]
Post subject:  Re: 2260/Disco stock screw replacement

just googled and found a picture here http://www.gmaccustomparts.com/epages/B ... s/2260-013

Image

Author:  Comrade_Zaitsev [ Fri Jan 29, 2016 6:07 pm ]
Post subject:  Re: 2260/Disco stock screw replacement

mooseslayerjc wrote:
With my disco it is a large Phillips. Off the top of my head I think it is a panhead screw.


Thank you for the assistance!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/