|Canadian Airgun Forum
|Help with a Crosman 451 stem and seat assembly problem.
|Page 2 of 2|
|Author:||Ace [ Mon Nov 07, 2016 12:29 pm ]|
|Post subject:||Re: Help with a Crosman 451 stem and seat assembly problem.|
glad you got R done...
many times a small imperfection on the valve face were the seal sits will cause very small leaks
tiny particles traveling with the co2 gas can lodge themselves and cause a crevice there and also on the stem seal face
that's why many air guns have a filter or screen just after the co2 cart...big leaks are usually the valve stem seal a small
tiny hiss is likely particles in the seal or the seat has an imperfection...
|Page 2 of 2||All times are UTC - 5 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group