Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Maximus polish and tune
https://www.airgunforum.ca/forums/topic75065.html
Page 1 of 1

Author:  DigitalFx33 [ Fri Jan 13, 2017 6:44 pm ]
Post subject:  Maximus polish and tune

Going to tear into my maximus tonight.
Work it over with a good clean up and trigger tune and internal polish
Are there any parts anyone needs some clear photos of?
Any one else do this to a maximus and have any tips to not overlook?
Thanks all.

Sent from my LG-D852 using Tapatalk

Author:  leadslinger [ Fri Jan 13, 2017 7:50 pm ]
Post subject:  Re: Maximus polish and tune

I just polished my hammer and installed a trigger kit. Tapped one hole for a Gmac multi shot breech.

Author:  kelly1 [ Fri Jan 13, 2017 8:27 pm ]
Post subject:  Re: Maximus polish and tune

Mine was so well finished I left it alone,crosman has really improved their finishing..Kelly

Author:  DigitalFx33 [ Fri Jan 13, 2017 8:31 pm ]
Post subject:  Re: Maximus polish and tune

So far my favorite feature of this particular model is this
Image

Sent from my LG-D852 using Tapatalk

Author:  DigitalFx33 [ Fri Jan 13, 2017 8:37 pm ]
Post subject:  Re: Maximus polish and tune

leadslinger wrote:
I just polished my hammer and installed a trigger kit. Tapped one hole for a Gmac multi shot breech.

Really interested in that breech.
What trigger kit did you use?

Sent from my LG-D852 using Tapatalk

Author:  leadslinger [ Fri Jan 13, 2017 11:38 pm ]
Post subject:  Re: Maximus polish and tune

DigitalFx33 wrote:
leadslinger wrote:
I just polished my hammer and installed a trigger kit. Tapped one hole for a Gmac multi shot breech.

Really interested in that breech.
What trigger kit did you use?

Sent from my LG-D852 using Tapatalk


I really wish I got the hunter model. Trigger was a Alliance Hobby one for a 2260/Disco. Same trigger mech as a Maximus and the multi shot breech I needed to tap one hole.

Trying to play with a 18" barrel. But everything on hold being I bought a house.

Image

Author:  DigitalFx33 [ Sat Jan 14, 2017 3:26 pm ]
Post subject:  Re: Maximus polish and tune

Did the 2 screw trigger mod, polished all the contact points in the trigger group plus moly and took a little preload out of the hairpin spring. Trigger is about acceptable. Oh I also put a much weaker spring on the trigger (pretty much did all the stuff in Bobs trigger Wright up less the 3rd screw)
That factory trigger spring though....anyone need a pal rated spring for a Springer? Haha.
Will be polishing up the hammer and giving it a moly treatment this eve. As well as take a look at the crown and treat acordingly.

Sent from my LG-D852 using Tapatalk

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/