Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Multi Shot Breech kit for Crosman 2240 2250 and 2260
https://www.airgunforum.ca/forums/topic75587.html
Page 1 of 1

Author:  abslayer [ Sun Mar 05, 2017 1:54 pm ]
Post subject:  Multi Shot Breech kit for Crosman 2240 2250 and 2260

Multi Shot Breech kit for Crosman 2240 2250 and 2260
Any one ever try this mod ??

Image

Author:  leadslinger [ Sun Mar 05, 2017 2:29 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

I got one mounted on my Maximus. I had to tap a hole to make it work. But the kit works well and nicely made. I went directly to GMAC to get mine. But I'm making a carbine and now the kit is going on a 2260.

Only issue I had was I had to shave some rings to make it clamp on the rail.

Author:  kelly1 [ Sun Mar 05, 2017 3:09 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

I have a couple of the BNM ones ,a little less efficient than a steel breech crosman but you can polish the probe back from the transfer port to gain some of the velocity back,really happy with them..kelly

Author:  abslayer [ Sun Mar 05, 2017 4:11 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

Any one try one of these on a Crossman 2240 ?

Author:  leadslinger [ Mon Mar 06, 2017 2:13 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

abslayer wrote:
Any one try one of these on a Crossman 2240 ?


What you want to know?

Author:  abslayer [ Mon Mar 06, 2017 3:19 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

Did it install easy and work with out jamming Did you lose any FPS ?

Author:  leadslinger [ Mon Mar 06, 2017 4:12 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

abslayer wrote:
Did it install easy and work with out jamming Did you lose any FPS ?


Installed easy, I never had it jam on me. It shouldn't loose FPS being that the transfer port is .149 so its larger then factory but It travels more. I cannot tell you the FPS it runs. But you can install a PA and get the FPS back.

Author:  Plasticman [ Mon Mar 06, 2017 6:11 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

I have had mine jam a couple of times. It is no big deal to clear it.
I can bring it to the next shoot if you are going to be there.
Hopefully Peter will set up an other before to long,

Author:  abslayer [ Mon Mar 06, 2017 8:55 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

Plasticman wrote:
I have had mine jam a couple of times. It is no big deal to clear it.
I can bring it to the next shoot if you are going to be there.
Hopefully Peter will set up an other before to long,


Shoot what part of Alberta you talking about?

Author:  Edmonton<500 [ Mon Mar 06, 2017 10:10 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

Calgary area. The group is called AIR-FT; contact rocker45 or castle02 for more info.

I have BMN multi breeches on two or three 2240s modded to carbines - they work great but are not cheap. They use easy-to-get Marauder magazines.

https://www.bnmcustom.com/all-products/
(U.S. prices - They recently rebuilt their website, and I don't see breeches only; you may have to call or email them)

Author:  abslayer [ Mon Mar 06, 2017 10:52 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

So Murray holding out on me with more of them guns you never show me when I was there hmmm 8) 8)
You can also get them in Canada at Gun Maintenance -CanadaShootingSupply

Author:  balan [ Mon Mar 06, 2017 11:07 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

I displayed a 2240 with an 8 shot crosman clip that I build at the Camrose Huntmania in Feb. and again at the Stony Plain gunshow this past weekend. I make them out of 7075 aircraft grade aluminum.

Author:  abslayer [ Wed Mar 08, 2017 1:00 am ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

balan wrote:
I displayed a 2240 with an 8 shot crosman clip that I build at the Camrose Huntmania in Feb. and again at the Stony Plain gunshow this past weekend. I make them out of 7075 aircraft grade aluminum.


Are you talking Clip and breach for 2240

Author:  balan [ Wed Mar 08, 2017 2:29 am ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

I build breech, bolt, and barrel band as a package for the crosman 2240. However I also put an oring seal on the end of the barrel. You can check my website, innovativemachining.ca where I have a pictorial of building a repeating breech for a Bam XS-B 50. All the breechs use the self indexing maurauder clips.

Ron

Author:  abslayer [ Wed Mar 08, 2017 3:10 pm ]
Post subject:  Re: Multi Shot Breech kit for Crosman 2240 2250 and 2260

How much for this kit for 2240 .22

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/