Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 25, 2024 2:48 pm

View unanswered posts | View active topics


Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
rws
PostPosted: Mon Sep 04, 2017 4:38 pm 
Offline

Joined: Sat Oct 12, 2013 11:20 pm
Posts: 326
Location: North Dakota
Whipped up some homemade risers...got tired of a poor cheek weld using scopes on my Backpacker and Custom Shop 1300 KT. Cut out some 4"x4"chunks of 1/8" plastic and formed them to fit the Crosman stock.

Backpacker left...1300 KT right
Image

1300 KT
Image

Backpacker
Image

1300 KT
Image

Backpacker
Image
Top
 Profile  
 
leadslinger
PostPosted: Mon Sep 04, 2017 4:45 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
ATI fibreforce cheek rest?
Top
 Profile  
 
slideextender
PostPosted: Tue Sep 05, 2017 12:10 am 
Offline

Joined: Sat Jun 10, 2017 6:48 pm
Posts: 7
Great idea! Love those pumpers! This is definitely on my "must to do" list. I need to put some optics on my Crosman, with the eye sight failing, open sight's are useless. What are the makes of the scopes you have installed? Thanks!
Top
 Profile  
 
rws
PostPosted: Tue Sep 05, 2017 5:56 am 
Offline

Joined: Sat Oct 12, 2013 11:20 pm
Posts: 326
Location: North Dakota
slideextender wrote:
Great idea! Love those pumpers! This is definitely on my "must to do" list. I need to put some optics on my Crosman, with the eye sight failing, open sight's are useless. What are the makes of the scopes you have installed? Thanks!


currently

Backpacker has a UTG 3-9x32 Adjustable Objective (Bugbuster)

1300 KT has a Tasco ProPoint red dot
Top
 Profile  
 
rws
PostPosted: Tue Sep 05, 2017 4:41 pm 
Offline

Joined: Sat Oct 12, 2013 11:20 pm
Posts: 326
Location: North Dakota
leadslinger wrote:
ATI fibreforce cheek rest?


I was in a recycling/re-purposing mode...

...the sourced material

I had bought a set of fender flares for my Polaris RZR side by side but didn't like how they functioned so took them off....a $175 mistake. The material is strong flexible HDPE textured on one surface and smooth on the other. Was easy to form with a heat gun.
Top
 Profile  
 
leadslinger
PostPosted: Tue Sep 05, 2017 6:22 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
rws wrote:
leadslinger wrote:
ATI fibreforce cheek rest?


I was in a recycling/re-purposing mode...

...the sourced material

I had bought a set of fender flares for my Polaris RZR side by side but didn't like how they functioned so took them off....a $175 mistake. The material is strong flexible HDPE textured on one surface and smooth on the other. Was easy to form with a heat gun.


What I use. Clamp bolt doesn't fully keep it tight on, so I'm just going to screw it on.

Image
Top
 Profile  
 
rws
PostPosted: Wed Sep 06, 2017 9:58 pm 
Offline

Joined: Sat Oct 12, 2013 11:20 pm
Posts: 326
Location: North Dakota
leadslinger wrote:
rws wrote:
leadslinger wrote:
ATI fibreforce cheek rest?


I was in a recycling/re-purposing mode...

...the sourced material

I had bought a set of fender flares for my Polaris RZR side by side but didn't like how they functioned so took them off....a $175 mistake. The material is strong flexible HDPE textured on one surface and smooth on the other. Was easy to form with a heat gun.


What I use. Clamp bolt doesn't fully keep it tight on, so I'm just going to screw it on.

Image


That ATI SKS riser was an inspiration to make my own out of the fender flare material...

used a heat gun and formed the plastic around a broom handle...then bent an angle on each side to match the angle of the stock...

ImageUploaded at Snapagogo.com

I have a lot of material left...

Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO