Canadian Airgun Forum
https://www.airgunforum.ca/forums/

What fitting for standard HPA bottle/regulator?
https://www.airgunforum.ca/forums/topic78685.html
Page 1 of 1

Author:  987654321 [ Wed Feb 14, 2018 3:08 pm ]
Post subject:  What fitting for standard HPA bottle/regulator?

I'm looking at a DIY bottle-fed PCP conversion on a 1322. I'll be working with 1/8 NPT fittings, what fitting do I need to connect it to a regulated tank? Any of the standard HPA bottles for paintball... Thanks!

Author:  pelsby [ Wed Feb 14, 2018 5:27 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

This is a common tank connection . Hunting on ebay might come up with a suitable hose and quick connect combination . be prepared to wait 30 -45 days for delivery though .
https://www.aliexpress.com/item/New-Pai ... sstype=600

Author:  987654321 [ Wed Feb 14, 2018 8:27 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

Thanks for the quick reply. I think, at least until I get it dialed (or even working?), I’m going to run a hose, so all I’ll need is a 1/8 npt to quick disconnect, plus a paintball coil hose to connect to the tank.

Author:  Watertown [ Wed Feb 14, 2018 10:29 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

You could try this site for fittings. I have found them to be fast for shipping.
http://www.bestfittings.co.uk/default.asp

Or this site
http://scopesandammo.com/storefront/ind ... parts-c-43

Or this site, he can set you up with any configuration you need.
http://www.airtanksforsale.com/

Author:  wesb2007 [ Thu Feb 15, 2018 10:45 am ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

Here's all you'll need then. Just unscrew the black cap and you have a 1/8npt quick disconnect plus your hose and Asa for the bottle, all for $20 shipped. New Paintball PCP Coil Remote Hose Thick Air Line 2.5M With Quick Disconnect-BLACK
http://s.aliexpress.com/6N3eQNzA?fromSns=Copy to Clipboard
(from AliExpress Android)
Epacket shipping is actually quite fast though not as fast as Canadian location of course.


Sent from my LG-H812 using Tapatalk

Author:  pelsby [ Thu Feb 15, 2018 2:52 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

+1
https://www.aliexpress.com/item/New-Paintball-Coil-Remote-Hose-With-Quick-Disconnect-BLACK/1532690238.html?shortkey=6N3eQNzA&addresstype=600
Image

Author:  wesb2007 [ Thu Feb 15, 2018 8:29 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

Yep same one, nice you included the pic [emoji5]

Sent from my LG-H812 using Tapatalk

Author:  wesb2007 [ Sat Feb 17, 2018 11:27 pm ]
Post subject:  Re: What fitting for standard HPA bottle/regulator?

Oops, actually I wouldn't recommend that one, so my apologies if you did order it. This one will be much nicer to work with because it has the slide check valve and is only a couple dollars more. Airsoft PCP Paintball marker Coil Remote Hose Thick line 2.5 WITH Slide Check paintball accessories New
http://s.aliexpress.com/eEFRrmEf?fromSns=Copy to Clipboard
(from AliExpress Android)
Make sure and choose epacket for shipping or you'll be waiting forever lol. Image

Sent from my LG-H812 using Tapatalk

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/