|Canadian Airgun Forum
|Page 1 of 1|
|Author:||redwings [ Mon Feb 04, 2019 7:49 pm ]|
|Post subject:||Too loose|
I have a silver streak that’s made in Racine with the push pull safety. I acquired an old 2 piece Sheridan scope mount. I tried installing on the streak but it’s loose even with the screws tight, I put some tape on the barrel. It worked but it’s not a permanent fix. Any ideas to make it work? The mount is black, about 3 inches long and aluminum. Thanks
|Author:||badshot [ Tue Feb 05, 2019 7:37 pm ]|
|Post subject:||Re: Too loose|
Could a thin piece of brass tubing from a hobby shop be used to make a shim ? It could be slit and put over the barrel .
Without some pictures its kind of difficult to diagnose the problem .
|Page 1 of 1||All times are UTC - 5 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group