| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| hpa fitting https://www.airgunforum.ca/forums/topic83246.html |
Page 1 of 1 |
| Author: | tazz [ Fri Jul 12, 2019 4:04 pm ] |
| Post subject: | hpa fitting |
Would this fitting be safe for a hpa conversion. https://www.ansgear.com/Warrior_1_8_Inc ... -dblk.htm# I will be running around 1100 psi with a 1800 burt disk. I know I can use a heavy hydraulic fitting but compact would be best. |
|
| Author: | wesb2007 [ Fri Jul 12, 2019 4:51 pm ] |
| Post subject: | Re: hpa fitting |
It's made for paintball, so it should be good. Paintball bottles have 1.8k burst disk so the fitting must be rated for that, at least should be! Ansgear is a respected company and I'm sure they would not want to sell something will blow up. =) Sent from my EML-L09 using Tapatalk |
|
| Author: | tazz [ Fri Jul 12, 2019 5:43 pm ] |
| Post subject: | Re: hpa fitting |
Thanks for the reply Wes. |
|
| Author: | PZAM [ Sat Jul 13, 2019 4:27 am ] |
| Post subject: | Re: hpa fitting |
I would go with this one from the same website: https://www.ansgear.com/PSI_1_8_Inch_NP ... nickel.htm There's a bit more meat on it. Quote: It's made for paintball, so it should be good. Paintball bottles have 1.8k burst disk so the fitting must be rated for that, at least should be! It depends on what the fitting is intended for, there are markers made for lower pressure bottles than the traditional 850 psi output and others that integrate an on-board regulator so it's worth checking. |
|
| Author: | Pushtone [ Mon Jul 15, 2019 11:38 pm ] |
| Post subject: | Re: hpa fitting |
How about the steel hose. Even the 3.5" one can bend 90deg. I used this 4.5" hose on my QB78 hpa conversation. The hose makes it easy to disassemble with the bottle fixed to the stock. https://www.ansgear.com/Stainless_Steel ... ose4.4.htm Attachment: IMG_20190715_213727.jpg [ 453.4 KiB | Viewed 1156 times ] |
|
| Author: | tazz [ Tue Jul 16, 2019 4:11 am ] |
| Post subject: | Re: hpa fitting |
I plan on using the steel hose and fittings. My tank will be mounted under the shoulder stock, like a paintball gun. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|