Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Ninja Hpa bottle regulator https://www.airgunforum.ca/forums/topic84713.html |
Page 1 of 1 |
Author: | dscvmc [ Wed Jan 15, 2020 12:29 pm ] |
Post subject: | Ninja Hpa bottle regulator |
Has anybody adjusted the regulator on a Ninja HPA bottle? I understand that you use belleville washers.Not sure where to buy these in Canada. Sent from my iPhone using Tapatalk |
Author: | Crosmann [ Wed Jan 15, 2020 1:07 pm ] |
Post subject: | Re: Ninja Hpa bottle regulator |
there's a guy on youtube that uses them and he shows an invoice from where he gets them. I'm not sure if it's in Canada though. He does a step by step with them though. Cheers |
Author: | dscvmc [ Wed Jan 15, 2020 1:10 pm ] |
Post subject: | Re: Ninja Hpa bottle regulator |
Yeah seen that.They will not ship to Canada. Sent from my iPhone using Tapatalk |
Author: | Gippeto [ Wed Jan 15, 2020 3:08 pm ] |
Post subject: | Re: Ninja Hpa bottle regulator |
The belleville washers I ordered from Fastenal. The adjustment shims I got from Eric @ Scopes and ammo. He had a couple thicknesses. Obtain/put together a test fixture before you start....or order a bunch of 1.8K burst discs. Al |
Author: | dscvmc [ Wed Jan 15, 2020 3:21 pm ] |
Post subject: | Re: Ninja Hpa bottle regulator |
Thanks. Sent from my iPhone using Tapatalk |
Author: | Voltar1 [ Wed Jan 15, 2020 7:27 pm ] |
Post subject: | Re: Ninja Hpa bottle regulator |
Gippeto wrote: The belleville washers I ordered from Fastenal. The adjustment shims I got from Eric @ Scopes and ammo. He had a couple thicknesses. Obtain/put together a test fixture before you start....or order a bunch of 1.8K burst discs. Al Exactly right!!! Lol |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |