Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 02, 2020 9:48 am

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!


You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Oct 25, 2019 2:27 pm 

Joined: Thu Jun 13, 2019 8:16 pm
Posts: 1
Hi everyone.
My name is jean

I have a Benjamin trail NP model BBP77 that need the trigger reassemble.

So far I believe that these are in the right order and position.
except for two springs that have me somewhat confused
Second sear spring (Part # S3-00-18 and Third sear spring (Part # S3-00-10 the only visible difference is the angle of the bend, one is bent at a 60 degrees and the other is bent at 120 degrees.
for the rest
#32 Second Sear (Part # S3-004) and #33 Second Sear Spring (Part # S3-004)
#28 Sear (Part # S3-003) and #29 Sear Spring (Part # S3-00-14)are already installed although not certain of the correct orientation.
#24Triger Spring (Part # S3-009) and #25 Trigger (Part # S3-00-06C)
#36 Pin of rear screw (Part # S3-00-11) can only go in one spot.
I was unable to add pictures, I can send you some in an email if you need to see them.
I need help to reassemble them. The correct positioning and orientation as well as the order in which they should be installed.
Any other hint to make the job easier would be greatly appreciated
Thank you.
Jean Côté

PostPosted: Sat Oct 26, 2019 4:28 am 
User avatar

Joined: Thu May 07, 2015 8:30 pm
Posts: 1276
Location: Eastern Townships
Salut et bienvenue sur le forum Jean!

I can't help much as I don't have a Benjamin Trail NP pistol, but here's the exploded view, that you can get here: ... pistol-177 . Also I could post your pictures for you if you need to, just send me a private message and we'll fix that.

Benji_Trail_pistol_trigger.jpg [ 100.09 KiB | Viewed 602 times ]
Parts_list.png [ 106.54 KiB | Viewed 602 times ]
PostPosted: Wed Feb 19, 2020 7:38 pm 

Joined: Sat Feb 10, 2018 6:57 am
Posts: 1
I went through the exact same issue reassembling mine. It took me a week of playing with it for about 15 minutes at a time each night until my frustration level went through the roof, before I got it reassembled. I could not find any pictures using Google that were helpful and no diagrams other than the one already posted in this thread.
If you still need assistance I will partially dissasemble my gun and take some pics for you.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group