Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Crosman mk1 custom shroud
https://www.airgunforum.ca/forums/topic89330.html
Page 1 of 1

Author:  killercrow [ Thu Aug 26, 2021 1:01 am ]
Post subject:  Crosman mk1 custom shroud

Little shroud and barrel I'm still finishing up. Decided to share it here.
Pretty tight setup. Custom filed the sight, wasn't too bad :lol:
I have it soldered on... Hoping it's a good bond.

Attachments:
IMG_20210825_223535093.jpg
IMG_20210825_223535093.jpg [ 647.8 KiB | Viewed 295 times ]
IMG_20210825_223542851.jpg
IMG_20210825_223542851.jpg [ 657.52 KiB | Viewed 295 times ]
IMG_20210820_232445615.jpg
IMG_20210820_232445615.jpg [ 702.31 KiB | Viewed 295 times ]

Author:  prhess [ Thu Aug 26, 2021 11:08 am ]
Post subject:  Re: Crosman mk1 custom shroud

Looks great

How is the barrel attached to the shroud

Author:  BB1Shooter [ Thu Aug 26, 2021 11:31 am ]
Post subject:  Re: Crosman mk1 custom shroud

Yes, nice work.

Please keep us posted on how it ends up & other mods.

Author:  killercrow [ Thu Aug 26, 2021 12:20 pm ]
Post subject:  Re: Crosman mk1 custom shroud

It's attached the same way as the stock barrel. Using the factory barrel nuts on both ends. Machined a 22xx barrel to fit.

Oh and I did this here

Attachments:
IMG_20210826_112236684.jpg
IMG_20210826_112236684.jpg [ 655.71 KiB | Viewed 244 times ]
IMG_20210826_112245761.jpg
IMG_20210826_112245761.jpg [ 647.83 KiB | Viewed 244 times ]

Author:  Dukemeister [ Thu Aug 26, 2021 12:29 pm ]
Post subject:  Re: Crosman mk1 custom shroud

Looks awesome. If the parts were clean and the gap just a clearance fit then the solder should hold it good until you want to remove it by heating again.

Author:  killercrow [ Fri Sep 03, 2021 5:49 pm ]
Post subject:  Re: Crosman mk1 custom shroud

And it is all done.
Except for powder coating...
Came together nicely. Made a nice little flow through bolt for it too.

Attachments:
IMG_20210903_112242988.jpg
IMG_20210903_112242988.jpg [ 657.67 KiB | Viewed 181 times ]
IMG_20210903_112214911.jpg
IMG_20210903_112214911.jpg [ 713.93 KiB | Viewed 181 times ]

Author:  TCooper [ Fri Sep 03, 2021 7:23 pm ]
Post subject:  Re: Crosman mk1 custom shroud

Nice work! Looking forward to seeing the finished product with the durable powder coating.

Author:  killercrow [ Fri Sep 03, 2021 11:35 pm ]
Post subject:  Re: Crosman mk1 custom shroud

Yes it'll be nice to see finished!
This one is going to another member here. The new owner will do the powder coating. It should be sweet for sure.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/