Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Benjamin Trail
https://www.airgunforum.ca/forums/topic89432.html
Page 1 of 2

Author:  revid [ Tue Sep 07, 2021 8:11 am ]
Post subject:  Benjamin Trail

I have a Benjamin Trail model M-BTN 292 and need some parts. Does anyone know of a site where I can order parts?

Author:  MyCrosman [ Tue Sep 07, 2021 8:19 am ]
Post subject:  Re: Benjamin Trail

Parts...find here....https://support.crosman.com/hc/en-us/ca ... s-Diagrams

but order at Crosman.ca

Author:  revid [ Tue Sep 07, 2021 11:52 am ]
Post subject:  Re: Benjamin Trail

Site says no parts

Author:  airmec [ Tue Sep 07, 2021 4:19 pm ]
Post subject:  Re: Benjamin Trail

That's sad: ''Parts not available through Crosman.''

What do you need? You may try your luck on Ebay. Or maybe ARH or some other aftermarket supplier can help :?:

Author:  notec [ Tue Sep 07, 2021 4:29 pm ]
Post subject:  Re: Benjamin Trail

Im sure there may even be a member on here with spare parts........whatcha lookin for lol

Author:  revid [ Tue Sep 07, 2021 4:58 pm ]
Post subject:  Re: Benjamin Trail

The “nut” that holds on the piece of pipe that goes over barrel and whatever else. It came I unscrewed and lost them
Parts without notice

Author:  MyCrosman [ Tue Sep 07, 2021 5:39 pm ]
Post subject:  Re: Benjamin Trail

revid wrote:
The “nut” that holds on the piece of pipe that goes over barrel and whatever else. It came I unscrewed and lost them
Parts without notice


which part is it?

Attachments:
Screenshot_20210907-183419.png
Screenshot_20210907-183419.png [ 306.23 KiB | Viewed 254 times ]

Author:  revid [ Tue Sep 07, 2021 7:02 pm ]
Post subject:  Re: Benjamin Trail

I don’t remember all them parts. My gun is a Benjamin Trail model M-BTN292. Besides the gun itself I have the piece that over the barrel like #14

Author:  MyCrosman [ Tue Sep 07, 2021 7:07 pm ]
Post subject:  Re: Benjamin Trail

revid wrote:
I don’t remember all them parts. My gun is a Benjamin Trail model M-BTN292. Besides the gun itself I have the piece that over the barrel like #14

That IS the parts diagram for the BTN292.....Maybe someone on here has one and can help you out....I'm out of ideas....

Attachments:
Screenshot_20210907-200513.png
Screenshot_20210907-200513.png [ 220.1 KiB | Viewed 245 times ]

Author:  revid [ Tue Sep 07, 2021 7:10 pm ]
Post subject:  Re: Benjamin Trail

Thanks all the same. Anyone out there with parts???

Author:  notec [ Tue Sep 07, 2021 8:40 pm ]
Post subject:  Re: Benjamin Trail

It seems to me you need something to keep the shroud on the barrel. On the diagram above it is held in place by the muzzle brake......if you dont have that, one of out members may be able to make the part for you. If you have a minute, take a picture of your gun, so we can determine which variant it is.

Author:  revid [ Wed Sep 08, 2021 4:30 am ]
Post subject:  Re: Benjamin Trail

This is a pic of the shroud

Attachments:
FC790165-EC45-4088-A390-52A810A77950.jpeg
FC790165-EC45-4088-A390-52A810A77950.jpeg [ 139.56 KiB | Viewed 209 times ]

Author:  TCooper [ Wed Sep 08, 2021 9:58 am ]
Post subject:  Re: Benjamin Trail

Do you just need part #18 in the parts diagram posted above? From the diagram it looks like the muzzle brake (trail baffle) slides on last so it likely has threads to catch the threads on the metal barrel. Gravel Agency seems to have them in stock but you have to call to order.

NP214-001 : TRAIL BAFFLE
https://store.gravelagency.com/en/np214 ... affle.html

They don't have the o-ring but you should be able to find something at a local plumbing store, CanTire or HomeDepot.

Author:  revid [ Sat Sep 18, 2021 9:22 am ]
Post subject:  Re: Benjamin Trail

It don’t look like #18 will screw on the barrel cause there’s to many parts in between and My gun has different barrel . Look at my pic , the extension barrel is not like mine at all. The pice I got like #14 is already tapered and in one piece. The schematic shows them in separate pieces

Author:  leadslinger [ Sat Sep 18, 2021 10:23 am ]
Post subject:  Re: Benjamin Trail

revid wrote:
It don’t look like #18 will screw on the barrel cause there’s to many parts in between and My gun has different barrel . Look at my pic , the extension barrel is not like mine at all. The pice I got like #14 is already tapered and in one piece. The schematic shows them in separate pieces


You need NP214-001 : TRAIL BAFFLE

The piece that is tapered on your shroud is actually part # 13. There is a o ring over part # 13 to keep it tight.. So you think it is 1 piece but it is actually 2 pieces. To secure the shroud you need what was mentioned NP214-001.

Because P/N #18 in the picture is for the US model with the baffles, Which is prohibited in Canada so part # NP214-001 : TRAIL BAFFLE is the Canadian version It is solid, with a female threaded end. You slide Part #13 over, then Part 14.. In your case 13/14 is already assembled, Then thread on the NP214-001 : TRAIL BAFFLE which secures the shroud.

I know this, because I put a shroud on a Crosman Summit, and used part # 13, and the NP214-001.

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/