Canadian Airgun Forum
https://www.airgunforum.ca/forums/

2240xl barrel
https://www.airgunforum.ca/forums/topic89451.html
Page 1 of 1

Author:  JayDee24ca [ Wed Sep 08, 2021 11:59 am ]
Post subject:  2240xl barrel

How does one remove the end cap from the barrel on a 2240xl? The thread protector removes easily, but the end cap won't budge.
Thanks
JD

Author:  notec [ Wed Sep 08, 2021 1:13 pm ]
Post subject:  Re: 2240xl barrel

Put it in a pot of hot water and tap it off.......its just a press fit

Author:  JayDee24ca [ Wed Sep 08, 2021 9:19 pm ]
Post subject:  Re: 2240xl barrel

Strange, then. I had the barrel off and mounted in a wooden-jawed vice, then put a torch on the end cap for a minute or so, and still it would not budge. I am beginning to think it is the same piece as the barrel itself!

Author:  notec [ Thu Sep 09, 2021 5:03 am ]
Post subject:  Re: 2240xl barrel

I wouldnt use a torch on it, you may damage the part.

Attachments:
THREAD-BARREL-ADAPTER.jpg
THREAD-BARREL-ADAPTER.jpg [ 48.55 KiB | Viewed 777 times ]

Author:  JayDee24ca [ Fri Sep 10, 2021 12:02 am ]
Post subject:  Re: 2240xl barrel

notec wrote:
I wouldnt use a torch on it, you may damage the part.

Not sure what you are trying to show me with that photo. The flared end cap on my 2240XL does not have a grub screw in it. Wish it did; it would sure make it easier to remove!!

Author:  killercrow [ Fri Sep 10, 2021 12:07 am ]
Post subject:  Re: 2240xl barrel

Can you post a picture?
Are they threaded? Epoxy?

Author:  notec [ Fri Sep 10, 2021 12:32 am ]
Post subject:  Re: 2240xl barrel

JayDee24ca wrote:
notec wrote:
I wouldnt use a torch on it, you may damage the part.

Not sure what you are trying to show me with that photo. The flared end cap on my 2240XL does not have a grub screw in it. Wish it did; it would sure make it easier to remove!!

That is because that one is made to put on a barrel that didnt come with the threaded attachment. The point was to show you that they do come off.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/