Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Has anyone made a 13XX pivot plug but without a barrel band?
https://www.airgunforum.ca/forums/topic89535.html
Page 1 of 1

Author:  leadslinger [ Sat Sep 18, 2021 11:59 am ]
Post subject:  Has anyone made a 13XX pivot plug but without a barrel band?

I've been building this gun over covid. It almost done, except a few things. Was wondering has anyone made a pivot plug that doesn't have a barrel band?

I tried modifying a stock one and just doesn't look right.

Image

Author:  Headdamage [ Sat Sep 18, 2021 12:48 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

I have seen them, usually called a free float kit for a 13xx. Here is one:

https://www.alliancehobby.com/floater.htm

Image

Author:  leadslinger [ Sat Sep 18, 2021 1:48 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

Thanks, hopefully if I order from them this time. They won't forget to send my order. I waited over 2 months for my breech riser from them. It was lost in the mail, he just never sent it.

Author:  YepYep [ Sat Sep 18, 2021 1:55 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

Welcome back~ long time no see Sir~

Just thinking if you can simply cut off the upper part of the plug?!

And maybe you can try contact Airmec, he made a very nice barrel band for my PP700 based on my request... And I know he made some other good parts for our other forum members ~

Author:  leadslinger [ Sat Sep 18, 2021 2:00 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

YepYep wrote:
Welcome back~ long time no see Sir~

Just thinking if you can simply cut off the upper part of the plug?!



Thanks. that is what I got now, and just doesn't look right, as it isn't fully round..

Author:  ineedpal [ Sat Sep 18, 2021 2:05 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

I can probably 3D print one for you if you cover the shipping (~$5). PM if interested. But usually I just cut off the barrel band portion from the stock one and call it a day.

Author:  leadslinger [ Sat Sep 18, 2021 2:06 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

ineedpal wrote:
I can probably 3D print one for you if you cover the shipping (~$5). PM if interested. But usually I just cut off the barrel band portion from the stock one and call it a day.


PM sent.. I have another thing I might need.

Author:  airmec [ Sat Sep 18, 2021 2:26 pm ]
Post subject:  Re: Has anyone made a 13XX pivot plug but without a barrel b

leadslinger wrote:
Was wondering has anyone made a pivot plug that doesn't have a barrel band?


Yes but I think you're OK now 8) .

Attachments:
2289_pivot_block.JPG
2289_pivot_block.JPG [ 59.51 KiB | Viewed 101 times ]

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/