Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Modifications to Crosman Hunter Express MDL. 7-REHNP27 https://www.airgunforum.ca/forums/topic89539.html |
Page 1 of 1 |
Author: | Easydog [ Sat Sep 18, 2021 4:47 pm ] |
Post subject: | Modifications to Crosman Hunter Express MDL. 7-REHNP27 |
Hi all New to your forum, and looking to upgrade the FPS on a Crosman Hunter Express .177 Rifle. model number on the gun is 7-REHNP27. I need to know the parts required, and part numbers if possible. Spoke to Canada Shooting Supply, and they carry some pistons but cannot or maybe will not get into recommending the correct piston ,and what ever else thats required to do this mod. I have a PAL so legally I am good to go, but need to know the parts required, and numbers for the parts if at all possible. Also a general heads up on this project would also be appreciated. Gun at present is rated for 495FPS, Thanks for letting me post. Easydog |
Author: | Ace [ Sat Sep 18, 2021 11:03 pm ] |
Post subject: | Re: Modifications to Crosman Hunter Express MDL. 7-REHNP27 |
hello welcome to CAF how about taking a minute to make a proper introduction introduce-yourself-f13.html also were are you from ? |
Author: | Peter5050 [ Thu Oct 14, 2021 3:50 am ] |
Post subject: | Re: Modifications to Crosman Hunter Express MDL. 7-REHNP27 |
Perhaps try to get parts from the Crosman Vantage NP. Might work as the compression tube guts seem to be similar. At least you can source the parts list from Crosman's US support site https://support.crosman.com/hc/en-us/ca ... s-Diagrams Only good thing about the low powered gun is that it is nice and quiet. |
Author: | Headdamage [ Thu Oct 14, 2021 4:12 am ] |
Post subject: | Re: Modifications to Crosman Hunter Express MDL. 7-REHNP27 |
This tread looks like it is relevant... https://www.airgunforum.ca/forums/topic85404.html |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |