Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 25, 2024 2:39 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Fri May 20, 2022 4:20 pm 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
hello there,
i bought a Benjamín classic back in 2017 had plenty of fun with it and then i had to move into a big city for 5 years ... took the gun out and gave it a tune up and realized that the barrel got damaged :(

i went on crosman sent them a msg asking for the part list for this gun and the part number for the barrel ... never got a single answer
am at a total lost here

i did plenty of research and i think the gun is a b19 series (but its always a guess)

the barrels are not so cheap :S on crosman.ca and i dont want to buy the wrong barrel but i dont mind if its a upgraded barrel but i want it to be a bolt on on my gun

would it be possible to direct me on the right path ...sending me the correct equivalent in parts for the Benjamín classic

confirming what barrels number fits on my gun ?

heres what i can read on the broken barrel

model:33000
.22 cal
d16x08666

thank you so much for your help it is really appreciated


Top
 Profile  
 
PostPosted: Fri May 20, 2022 7:10 pm 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON
Can you post a picture of the breach lock up? That's the main area that has different versions over the years, otherwise any Crosman B18/19 barrel will fit. It's important to match the breach profile and jam configuration.

_________________

))))----//----------==

Iacio, ergo sum


Top
 Profile  
 
PostPosted: Fri May 20, 2022 7:25 pm 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
Dukemeister wrote:
Can you post a picture of the breach lock up? That's the main area that has different versions over the years, otherwise any Crosman B18/19 barrel will fit. It's important to match the breach profile and jam configuration.




sure no problem at all . keep in mind i already removed parts from it waiting for the new barrel tell me if it is what you need


Attachments:
2.jpg
2.jpg [ 92.55 KiB | Viewed 863 times ]
1.jpg
1.jpg [ 174.85 KiB | Viewed 863 times ]
Top
 Profile  
 
PostPosted: Fri May 20, 2022 7:51 pm 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
here if this can help


Attachments:
3.jpg
3.jpg [ 115.53 KiB | Viewed 851 times ]
5.jpg
5.jpg [ 30.91 KiB | Viewed 851 times ]
Top
 Profile  
 
PostPosted: Fri May 20, 2022 10:57 pm 
Offline
Site Moderator

Joined: Sat Sep 03, 2005 9:25 am
Posts: 4598
Location: Ontario, Canada
What's damaged on the original barrel? Is it fixable?


Top
 Profile  
 
PostPosted: Sat May 21, 2022 1:27 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
TCooper wrote:
What's damaged on the original barrel? Is it fixable?

i wont be able to show it with a picture but the cannon is crooked


Top
 Profile  
 
PostPosted: Sat May 21, 2022 1:33 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
TCooper wrote:
Is it fixable?

and for the question i guess a machinist could be able to fix it but i cant thats for sure :(


Top
 Profile  
 
PostPosted: Sat May 21, 2022 2:36 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
heres tow models that i found that i think might be the right part (but what do i know)

B19-7-01-100B Barrel Assembly from a MODEL 30001 TR77

B19-7-01-100(5.5) Barrel Assembly from a MODEL CD8M22NP Nitro venom

maybe im wrong and they are wrong but the only part that i do not have on my barrel is the adjustable washer (not sure what it does) other then that by the look of it they have the muzzle break and they do look the same not sure the difference between the tow (one has a b the other doesn't)


is it what i am looking for, will it fit, witch one will, how can i know ... i hate crosman for not just having a part list for the classic .22


Attachments:
no b.png
no b.png [ 7.09 KiB | Viewed 831 times ]
model cd8m22np.jpg
model cd8m22np.jpg [ 223.33 KiB | Viewed 831 times ]
model 30001.jpg
model 30001.jpg [ 202.27 KiB | Viewed 831 times ]
Top
 Profile  
 
PostPosted: Sat May 21, 2022 6:52 am 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON
The lower picture shows the correct breach shape, but it's a .177 cal barrel.
The upper picture is the right calibre but wrong breach shape. You need to find the .22 cal with the right shape breach. I believe a Phantom .22 may be your best choice.


Attachments:
Crosman B19 breaches.jpg
Crosman B19 breaches.jpg [ 61.55 KiB | Viewed 826 times ]

_________________

))))----//----------==

Iacio, ergo sum
Top
 Profile  
 
PostPosted: Sat May 21, 2022 7:32 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
Dukemeister wrote:
The lower picture shows the correct breach shape, but it's a .177 cal barrel.
The upper picture is the right calibre but wrong breach shape. You need to find the .22 cal with the right shape breach. I believe a Phantom .22 may be your best choice.


oh waw ok that's a small difference that do make a big difference thank you for helping me out

and for the .177 here is the thing i think i can send only 3 pics but here the other one

i dont know if its a possible bug ... but on the crosman site there's the .22 option using the part number


and for the phantom it is the wrong shape sadly


Attachments:
image_2022-05-21_083050740.png
image_2022-05-21_083050740.png [ 21.98 KiB | Viewed 822 times ]
Top
 Profile  
 
PostPosted: Sat May 21, 2022 9:30 am 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON
Over the years Crosman changed the jams and the breach shape. The other place to check is the stationary jam, the one in the receiver end. The cross pin is the current version, part 14 as shown below - and the one in your Classic. The older versions had a stationary jam that was similar in shape to the alive jam. I have not looked to see if the part number of the alive jam has changed over the years, but check and see.


Attachments:
Image1.jpg
Image1.jpg [ 9.63 KiB | Viewed 824 times ]

_________________

))))----//----------==

Iacio, ergo sum
Top
 Profile  
 
PostPosted: Sat May 21, 2022 10:22 am 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 912
Location: Guelph, Ontario
sebastom wrote:
TCooper wrote:
What's damaged on the original barrel? Is it fixable?

i wont be able to show it with a picture but the cannon is crooked
You meant a bent barrel? I believe you can bend it back without having to replace the whole barrel.

Tom

_________________
AirArms TX200HC
AirArms S400F
Diana Outlaw
Feinwerkbau 300S
FX Dreamline Classic
Weihrauch HW100KT FSB
Weihrauch HW97KT
Weihrauch HW50S
Artemis M16
Artemis PP700
Weihrauch HW40
Beeman P17
Stoeger XP4


Top
 Profile  
 
PostPosted: Sat May 21, 2022 10:41 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
Dukemeister wrote:
Over the years Crosman changed the jams and the breach shape. The other place to check is the stationary jam, the one in the receiver end. The cross pin is the current version, part 14 as shown below - and the one in your Classic. The older versions had a stationary jam that was similar in shape to the alive jam. I have not looked to see if the part number of the alive jam has changed over the years, but check and see.



on the model 30001 the parts are

12 BT9M22-01-5C Alive Jam with a c at the end
13 BT9M22-00-4 Dead Jam


and on a random model BT9M22CNP
TRAIL NP
15 BT9M22-01-5 Alive Jam no c at the end
16 BT9M22-00-4 Dead Jam

and when i type the part on the crosman.ca none of them are showing up what i get is this
Crosman®
BT9M22-01-5D : Alive Jam with a d at the end (its the only one showing up online)
$9.20


and for the phantom B18‐01‐2 Alive Jam
Crosman®
B18-01-2 : ALIVE JAM (B18-01-2)
$5.28

so no they are not the same number but for the one that do have a similar system has my classic seems to all have the same part number

im not sure what are we trying to figure out here but i think its the info you needed?


Attachments:
File comment: ok so here the picture of the phantom
image_2022-05-21_111345966.png
image_2022-05-21_111345966.png [ 22.95 KiB | Viewed 806 times ]
Top
 Profile  
 
PostPosted: Sat May 21, 2022 11:04 am 
Offline

Joined: Fri May 20, 2022 3:57 pm
Posts: 10
tom_ke888 wrote:
sebastom wrote:
TCooper wrote:
What's damaged on the original barrel? Is it fixable?

i wont be able to show it with a picture but the cannon is crooked
You meant a bent barrel? I believe you can bend it back without having to replace the whole barrel.

Tom



yea well the thing is i tried and i damaged the interior and knew i up :(

if only i knew that the classic was a rare specimen on crosman parts


Top
 Profile  
 
PostPosted: Sat May 21, 2022 1:24 pm 
Offline

Joined: Thu Oct 13, 2005 6:52 pm
Posts: 8871
Location: Vancouver Island BC
yea well the thing is i tried and i damaged the interior and knew i up :(

if only i knew that the classic was a rare specimen on crosman parts[/quote]

Forum rules

2 While debating and discussion is fine, we will not tolerate rudeness, profanity (or attempts to bypass profanity filters), insulting posts, personal attacks or purposeless inflammatory posts. Our decision is final in these matters.

_________________
VE7SHM//VE7ZJ

Moderator


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO