I’ve been able to track down most of the parts. I was just hoping maybe someone beat me to it and had it working already
. The single stage Artemis isn’t a bad trigger by any means. I’m just more confident shooting a 2 stage trigger.
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| Cr 600 with gen 2 stormrider trigger possible? https://www.airgunforum.ca/forums/topic94973.html |
Page 1 of 1 |
| Author: | Jmclean85 [ Tue Jan 09, 2024 7:43 pm ] |
| Post subject: | Cr 600 with gen 2 stormrider trigger possible? |
I have one of Wes’s cr600/stormrider conversions. And looking to get another one in .25 soon. I’m wondering, would it be possible to put the Diana Improved Trigger from the gen 2 stormrider onto one of these? I really prefer the breaking point of a 2 stage trigger. |
|
| Author: | Knappr [ Tue Jan 09, 2024 8:33 pm ] |
| Post subject: | Re: Cr 600 with gen 2 stormrider trigger possible? |
I personally don’t see why not, as long as you can get your hands on the parts. Personally I find I can make both types of triggers work the same. I didn’t find the Diana trigger anymore adjustable the the Artemis as the bolts in the Diana were to short to do anything with, out of the box. In my stormrider review I mentioned what I did to improve my stormrider trigger. The Dragonfly mk2 comes with the typical Artemis trigger and I’m slowly getting it where I want it but I wish I had some the trigger screws that come with the Diana trigger so can add one to the dragonfly. |
|
| Author: | Jmclean85 [ Tue Jan 09, 2024 11:02 pm ] |
| Post subject: | Re: Cr 600 with gen 2 stormrider trigger possible? |
I’ve been able to track down most of the parts. I was just hoping maybe someone beat me to it and had it working already . The single stage Artemis isn’t a bad trigger by any means. I’m just more confident shooting a 2 stage trigger.
|
|
| Author: | Knappr [ Wed Jan 10, 2024 6:04 am ] |
| Post subject: | Re: Cr 600 with gen 2 stormrider trigger possible? |
From what I’ve seen both triggers are physically the same. The Artemis trigger only has one hole with a set screw which needs to be removed for any kind of adjustment. While the Diana has two holes drilled right threw it, which allows the adjustments to be made with trigger blade installed. I didn’t like the trigger in my stormrider out of the box, too much travel. I tried the screws but even when bottomed out I noticed no real changes plus the thread engagement of the screws wasn’t that great and the screws just vibrated out. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|