Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger m77/ https://www.airgunforum.ca/forums/topic90759.html |
Page 1 of 2 |
Author: | Headdamage [ Fri Jan 28, 2022 12:55 pm ] |
Post subject: | 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger m77/ |
Does anyone know of a 20 or 30 moa picatinny/weaver rail that will fit on an 11mm dovetail base or on a Ruger M77/22? Thanks. |
Author: | Daryl [ Fri Jan 28, 2022 1:34 pm ] | ||
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger | ||
D&L used to sell a 17.1moa and 21 moa rails that fit on standard air gun grooves. I have one of those on the .22 HW77 I have. Leapers, seems to me and sold by D&L- back then. I supposed THEY should be able to order them. Doesn't look like the 20MOA base at D&L fits the narrow grooves, but it might. Advertised as universal mount. Calling them would help, I suspect. https://dlairgun.com/collections/leaper ... lep-mn-061
|
Author: | Headdamage [ Fri Jan 28, 2022 2:25 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
That is close, I guess it could be used with an adaptor but I'd prefer to keep it to as few a parts as possible to minimize possible shifts in POI. |
Author: | Daryl [ Fri Jan 28, 2022 2:44 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
You are looking for a base WITH rings? ALL CF bench rest shooters use separate bases and rings for competition from 100 to 1000yards. I don't understand your reluctance to use multiple components. When locked together properly, they become one. |
Author: | grantmac [ Fri Jan 28, 2022 4:36 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
I've used the simple one-piece RWS mount on rimfires with good success so long as the bolt clears: https://dlairgun.com/collections/rws-mounts |
Author: | airmec [ Fri Jan 28, 2022 5:13 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
There's also this Sun Optics adjustable base with rings, fits on a dovetail rail: https://dlairgun.com/collections/sun-op ... base-combo Don't know about the rigidity/quality though ![]() |
Author: | Headdamage [ Fri Jan 28, 2022 6:20 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
Daryl wrote: You are looking for a base WITH rings? ALL CF bench rest shooters use separate bases and rings for competition from 100 to 1000yards. I don't understand your reluctance to use multiple components. When locked together properly, they become one. Sorry, I was referring to the fact I would need another adaptor to fit the weaver to the 11mm dovetail. I don't mind using separate rings, in fact it prefer separate rings. |
Author: | sillymike [ Sat Jan 29, 2022 2:56 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
Rusan Picatinny rail - Anschutz 54 - 20 MOA https://www.optics-trade.eu/ca/rusan-pi ... 0-moa.html Rusan makes some nice stuff, Optic-Trade are good guys to deal with |
Author: | Headdamage [ Sat Jan 29, 2022 4:01 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
That is also nice but will not fit my rifles. |
Author: | sillymike [ Sat Jan 29, 2022 5:41 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
What's your rifle? - If it has 11mm rail, it ought to. |
Author: | Headdamage [ Sat Jan 29, 2022 6:14 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
I could be wrong but it looked like it needed mounting screw holes that my rifle doesn't have. |
Author: | Daryl [ Sat Jan 29, 2022 6:29 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
Appears that way to me too. Even the underside picture don't show the dove-tail needed for the 11mm rail. They do show an elevation(sides), but not the requisite dovetail(s). |
Author: | sillymike [ Sat Jan 29, 2022 6:30 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
If you check with them, there ought to be other screws available with a "nylon" end that will simply put pressure on the receiver and keep the rail in place Otherwise, just noticed that Nordic (out of Nova-Scotia) has this, available in 15 or 30 moa https://www.nordicmarksman.com/Anschutz ... 15MOA.html ![]() |
Author: | Daryl [ Sat Jan 29, 2022 6:33 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
That one looks good! Pricey, but good. |
Author: | Headdamage [ Sat Jan 29, 2022 7:06 pm ] |
Post subject: | Re: 20 or 30 moa picatinny/weaver rail for KKJ and/or Ruger |
Of course, that one looks good and is out of stock lol. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |