It consists of a 3mm hole drilled into the trigger guard at the point where it bends before the main bolt, a 4mm tap and a 4mm bolt screwed in to take up all extra travel. This results in a MUCH crisper and lighter trigger.
Cheers,
Tony.
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| Chinese B2 .177 https://www.airgunforum.ca/forums/topic10121-15.html |
Page 2 of 2 |
| Author: | TonyV [ Thu Feb 08, 2007 4:55 am ] |
| Post subject: | |
I'm going to get one of those I think, seeing as I doubt if I'll ever have to shoot beyond 25 yards and this scope weighs half as much as the gun! Also, see the new pic I've added of a trigger mod for the B2 posted below. Cheers, Tony. |
|
| Author: | TonyV [ Thu Feb 08, 2007 4:57 am ] |
| Post subject: | B2 simple trigger mod |
|
It consists of a 3mm hole drilled into the trigger guard at the point where it bends before the main bolt, a 4mm tap and a 4mm bolt screwed in to take up all extra travel. This results in a MUCH crisper and lighter trigger. Cheers, Tony. |
|
| Author: | novan3 [ Sat Feb 10, 2007 12:46 am ] |
| Post subject: | |
Nice rifle!!! Say.......that stock looks a helluva lot like a QB stock. Curse those resourceful 3rd world communists. LOL 
|
|
| Author: | TonyV [ Sat Feb 10, 2007 3:58 am ] |
| Post subject: | |
The good news is that they are now flogging the B2-4 here for £23 and it comes with a really nice stock. I've ordered one in 22 plus an XS B3 which has also made its way into the UK for £50. I'll post pics when I receive them. Cheers, Tony. |
|
| Author: | ABshooter [ Sat Feb 10, 2007 2:21 pm ] |
| Post subject: | |
So the bolt presses against the trigger, taking up all the slack? Cooool. |
|
| Author: | Krazy Mike [ Sat Feb 10, 2007 2:33 pm ] |
| Post subject: | |
Off Topic 
Why is this Thread so long and (wide). I have to move over to the right so far it's not funny to read it. This happens in other cases also. Sorry guy's I have to ask  By the way sorry about your AG being damaged during shipping. But these BAM Xisico AG's are alright considering there not very expensive. I own one, and my Wife owns one also. There a kool gun for indoors. And if modded or bought in a PAL version would also be good for small game hunting as they have very descent barrels on them also... 
Krazy Mike... 
|
|
| Author: | TonyV [ Sun Feb 11, 2007 3:45 am ] |
| Post subject: | |
ABShooter: Yes, that simple and so effective! - I plan to do it to all my Xs guns, most of them have the same heavy trigger interface. Just have to change the bolt for a shorter one made from brass as it will look better. Krazy Mike: Not sure mate; they all appear the same to me. I use Mozilla for the net - could it be the browser? Tony. |
|
| Author: | TonyV [ Sun Feb 11, 2007 3:47 am ] |
| Post subject: | |
Mike: I forgot to add that the ones they sell here in the UK are all full power (11ftlb + on the B2 carbine we have). Tony. |
|
| Author: | TonyV [ Sun Feb 18, 2007 2:09 pm ] |
| Post subject: | |
I'm also adding to this thread a picture of the fully adjustable sights on the new .22 B2-4 I've purchased together with a pic of its brass screw trigger mod (it now has the B2-1 stock fitted as the new stock seemed to look even better on the .177 carbine - all the B2 parts are interchangeable). 
|
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|