Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Target Holder Pictures
https://www.airgunforum.ca/forums/topic64430.html		 Page 1 of 1
Author:  thumper [ Mon Sep 22, 2014 9:18 pm ]
Post subject:  Target Holder Pictures
.....I was asked to post pictures, so here they are.......The finished one is shown as normal and then extended......The worklight stand is on the ground fully 'collapsed' to show how compact it is. Actually, the worklights are removeable with 2 knobs and the power cord with 1 screw....so the stand can remain dual purpose by simply clamping a cardboard 'beer flat' to the cross piece using big 'paper/folder' spring clamps (Staples or any stationary store).....place targets on cardboard and blast away, maybe add some weight for stability....like a bag of used pellets, if needed.................Thumper.........

Attachments:
222.jpg
222.jpg [ 161.18 KiB | Viewed 1819 times ]
111.jpg
111.jpg [ 151.64 KiB | Viewed 1819 times ]
Author:  mike87gt [ Mon Sep 22, 2014 9:45 pm ]
Post subject:  Re: Target Holder Pictures
Great idea!!
Author:  Helipilot [ Wed Sep 24, 2014 7:43 pm ]
Post subject:  Re: Target Holder Pictures
A bit off topic , but is that a Sprite I see peaking out from behind the sliding door??

Dave
Author:  rrdstarr [ Wed Sep 24, 2014 8:31 pm ]
Post subject:  Re: Target Holder Pictures
I was going to ask that too!
Author:  lleader [ Wed Sep 24, 2014 8:36 pm ]
Post subject:  Re: Target Holder Pictures
I believe it's a Triumph TR3.
Author:  Ace [ Wed Sep 24, 2014 10:40 pm ]
Post subject:  Re: Target Holder Pictures
lleader wrote:
I believe it's a Triumph TR3.

I believe your correct :wink:
Author:  thumper [ Thu Sep 25, 2014 3:49 am ]
Post subject:  Re: Target Holder Pictures
....a TR3a I've been driving since 1970.................Thumper
Author:  mike87gt [ Thu Sep 25, 2014 7:12 am ]
Post subject:  Re: Target Holder Pictures
How about using old music stands, remember those metal ones from music class?
If I remember right they collapsed down quite compactly too
Author:  thumper [ Thu Sep 25, 2014 4:01 pm ]
Post subject:  Re: Target Holder Pictures
....I have a couple of music stands kicking around somewhere, but they don't extend to 5'5" for 10m 'standing'....they are fairly solid but the tripod base is small and the idea is for an outdoor stand so it has to be fairly robust or heavy enough to be stable..............A patio umbrella base could hold a pvc frame(like a 'drop/turn') as long as you didn't have to cart it around, I suppose...........Thumper
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/