hey all. so I am going to make a magnetic target trap like walterglocksmiths trap in the picture gallery. but as usual there was screw ups. so I decided to use the abominations for knockdown targets. I just use junction box covers [$1.19] at rona. and I used a grinder to cut them out. you can make as many legs as you wan;t and shape them any way you want with pliers. they are originally 5" around I think but I cut them down to 2" around. haven't tried them yet . but they will work. this steel is tough too and can really take a beating. there are tons of possibilities with these. pretty cheap too. good luck.
| Attachments: |
|
DSCN0514 (2).JPG [ 167.1 KiB | Viewed 2384 times ] |
|
DSCN0514 (4).JPG [ 190.66 KiB | Viewed 2384 times ] |
|
DSCN0514 (3).JPG [ 262.07 KiB | Viewed 2384 times ] |
I wonder if you could squeeze two targets out of each cover. Might have to be a bit of an oddball shape.