Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Shooting army men
https://www.airgunforum.ca/forums/topic81759.html
Page 1 of 2

Author:  leadslinger [ Tue Jan 15, 2019 3:58 pm ]
Post subject:  Shooting army men

Forgot how much fun it was.. Placed a white piece of paper, as a backing so I could see them better.

Unfortunately body shots, makes them fly into the paper. As seen here.

Image

Decided to try and shoot the hand.. First shot was low. Second I disarmed him...

https://youtu.be/aNHwoJmj4YE?list=UUlDa ... vwz6OcEKHQ

Author:  Ace [ Tue Jan 15, 2019 5:52 pm ]
Post subject:  Re: Shooting army men

that must be below 500fps.... my PAL airguns literally blows them to peaces
or I knock there heads clean off.... 8)

Author:  leadslinger [ Tue Jan 15, 2019 6:01 pm ]
Post subject:  Re: Shooting army men

Ace wrote:
that must be below 500fps.... my PAL airguns literally blows them to peaces
or I knock there heads clean off.... 8)


Yeah I was just using the Beeman P17 at around 410 FPS.. I was trying to knock their arms and head off. But guess I need something more powerful.

Author:  Ace [ Tue Jan 15, 2019 6:03 pm ]
Post subject:  Re: Shooting army men

plastic is to tough on those little guys.... :lol:
you might get away with a .22 just shy of 500
.177 forget it... :wink:

Author:  leadslinger [ Tue Jan 15, 2019 6:19 pm ]
Post subject:  Re: Shooting army men

Ace wrote:
plastic is to tough on those little guys.... :lol:
you might get away with a .22 just shy of 500
.177 forget it... :wink:


I thought they were much brittle.. I went with my 2100.. Should been around 650 FPS with 8.2s... And just left a dent in his helmet..

Image

Author:  MyCrosman [ Tue Jan 15, 2019 7:04 pm ]
Post subject:  Re: Shooting army men

Hi impact polystyrene....tough plastic...used to shoot 12 inch action figures made of that stuff when I was a kid and you wouldn't be blowin' the heads off of those guys with a springer....maybe a rimfire.. many hours...and years of fun with my first Slavia 624..... :D

Author:  Ace [ Tue Jan 15, 2019 7:48 pm ]
Post subject:  Re: Shooting army men

sorry your wrong my HW77 blows them to peaces

Author:  wheeliehd [ Tue Jan 15, 2019 8:28 pm ]
Post subject:  Re: Shooting army men

I have a bunch of the steel army tip overs. Have never shot them yet as I am looking for like a Barbie House or something similar sitting at the side of the road. To buy new is just way to much money to shoot at. Wooden house would be better but not for $100 and more. CHEERS!

Author:  MyCrosman [ Tue Jan 15, 2019 9:13 pm ]
Post subject:  Re: Shooting army men

Check out Value village or the Sally Ann for all kinds of targets.....

Author:  MyCrosman [ Tue Jan 15, 2019 9:20 pm ]
Post subject:  Re: Shooting army men

Ace wrote:
sorry your wrong my HW77 blows them to peaces

Put up a video of a Hw77 knocking the head off a I inch thick..... 12 inch tall high impact polystyrene figure and I'll send you a $100.00.…..Target practice from 3 inches doesn't count.....and THAT wouldn't do it either…...I worked with plastics of all kinds and I shot them too....what you state can't happen...oh...and ...sorry.

Author:  leadslinger [ Tue Jan 15, 2019 9:40 pm ]
Post subject:  Re: Shooting army men

I need to paint the backing white... I was trying to shoot the hands, rifle barrels etc..

Just hard when the crossair is contrasting with the dark backing.. But still managing to hit it.

That P17 is quite accurate..

Author:  Ace [ Tue Jan 15, 2019 10:15 pm ]
Post subject:  Re: Shooting army men

MyCrosman wrote:
Ace wrote:
sorry your wrong my HW77 blows them to peaces

Put up a video of a Hw77 knocking the head off a I inch thick..... 12 inch tall high impact polystyrene figure and I'll send you a $100.00.…..Target practice from 3 inches doesn't count.....and THAT wouldn't do it either…...I worked with plastics of all kinds and I shot them too....what you state can't happen...oh...and ...sorry.

are you for real buddy I don't make sh*t up what would be the point.... :roll:
and the army men don't have a 1" thick heads, what army men you talking about...lol
and I don't shoot from 3" never have never will not even with a pistol its more like 35ft that's my basement
shooting distance unless I open the laundry room door and that gives me another 10ft...
but since you like to give money away i'll see if i can shoot a vid if I get some time...Oh and sorry you will be, :wink:

did you not see the OP's pic of the pellet to head comparison...
Image

Author:  leadslinger [ Tue Jan 15, 2019 10:33 pm ]
Post subject:  Re: Shooting army men

BB left, RWS 8.2 Right.

I got one in the freezer. To see if I can make him lose his head.

Image

Author:  MyCrosman [ Tue Jan 15, 2019 10:44 pm ]
Post subject:  Re: Shooting army men

Yeah I read the post properly...but you obviously didn't read my post so your argument makes no sense....were you ever a politician?.. I mentioned 1 inch thick plastic figures I shot as a boy...in the 60s....which back in the day were made from plastic mixed with rubber which produced a different type of plastic used in toys etc..Many toy figures today are made from general polystyrene..as well as H.I.P.S. and other plastic variations....without the rubber additive so yeah...they could break apart....especially the tiny bits....however...vitamin bottles...etc. don't shatter or crack when hit do they...the caps do....but not the bottle..the pellets just pass through...and your pellets wouldn't pass through a 1 inch solid piece of H.I.P.S. (High Impact Polystyrene)...which is what my targets were made of ........sorry if you got confused...My offer stands... blow up a 1 inch solid HIPS with a springer....can't happen....no need to get ruffled..

Author:  Ace [ Wed Jan 16, 2019 1:29 am ]
Post subject:  Re: Shooting army men

ahhh... I see what you did there we where talking about the little army men the OP was mentioning
and so you decided to change it to a much bigger action figure.... :ANAL:
that kind of spin makes you a top politician good job... :lol:
that's like me telling you to shoot a firearm through a 1" metal plate... :butthead:

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/