Is I had another go at building at designing a micro duelling tree for 10m target practice. I will be building a prototype this weekend and if all goes well i will be looking for a machinist to build a more sturdy/professional looking version. Essentially what trying to do is design with the following criteria. If anyone know a machinist or someone good with metal feel free to message me.
- safe and durable at 10m shooting sub pal 177 (no bounce back)
- modular in that targets can be switch for less experienced shooter or replaced if broken. maybe add some silhouette targets down the line
- compact, I would like to be able to have 6 targets in a 20" configuration that can be taken apart for transportation
- reliable, the duelling tree must work flawlessly at 10m. no boucebacks
Attachment:
Screen Shot 2018-04-13 at 4.06.22 PM.png [ 127.32 KiB | Viewed 2661 times ]
My design will utilize a V shaped piece of metal with the inside edge lined with magnets. Rod will be positioned behind it to which the targets will be attached to and spaced out with spacers. If the target arms don't stick to the magnets, i can add additional magnets to them.