Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Inexpensive Pop Can Target https://www.airgunforum.ca/forums/topic87641.html |
Page 1 of 2 |
Author: | BINFORD [ Fri Jan 15, 2021 10:03 pm ] |
Post subject: | Inexpensive Pop Can Target |
Attachment: This is what I have been using for basement shooting with BB's. Simple wood frame and back, with layers of cardboard for a backer. Took the teacup hangers from the cupboard, and hang cans by the tab.(wife has not noticed ) |
Author: | wheeliehd [ Sat Jan 16, 2021 8:12 am ] |
Post subject: | Re: Inexpensive Pop Can Target |
Looks good. |
Author: | Ace [ Sat Jan 16, 2021 12:52 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
looks like just some plain cardboard behind those cans if so your shots will go straight through them cans and through the cardboard you need a better back stop.... |
Author: | BINFORD [ Sat Jan 16, 2021 2:30 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Ace wrote: looks like just some plain cardboard behind those cans if so your shots will go straight through them cans and through the cardboard you need a better back stop.... Wood back as stated in description. Cardboard prevents bb's from bouncing back, could also use duct seal, have lots of left over cardboard at work from shipments. |
Author: | BINFORD [ Sat Jan 16, 2021 2:33 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
wheeliehd wrote: Looks good. Thanks wheeliehd |
Author: | Ace [ Sat Jan 16, 2021 7:21 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
BINFORD wrote: Wood back as stated in description. Cardboard prevents bb's from bouncing back, could also use duct seal, have lots of left over cardboard at work from shipments. guess I missed that... yes duct seal would be better |
Author: | Dukemeister [ Sat Jan 16, 2021 7:23 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Neat! Fill it with holes and post as after pic. |
Author: | BINFORD [ Mon Jan 18, 2021 7:23 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Ace wrote: BINFORD wrote: Wood back as stated in description. Cardboard prevents bb's from bouncing back, could also use duct seal, have lots of left over cardboard at work from shipments. guess I missed that... yes duct seal would be better No worries Dukemeister wrote: Neat! Fill it with holes and post as after pic. Will do |
Author: | BINFORD [ Sun Jan 24, 2021 1:44 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Dukemeister wrote: Neat! Fill it with holes and post as after pic. Attachment:
|
Author: | wheeliehd [ Sun Jan 24, 2021 1:47 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Go through a lot of pellets in a hurry with that sport. |
Author: | Ace [ Sun Jan 24, 2021 1:52 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Author: | Dukemeister [ Sun Jan 24, 2021 2:19 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Love it! |
Author: | BINFORD [ Sun Jan 24, 2021 4:44 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
wheeliehd wrote: Go through a lot of pellets in a hurry with that sport. Yes, really enjoying this in the winter. Dukemeister wrote: Love it! Thanks Ace for putting the before and after together, save some scrolling |
Author: | Ace [ Sun Jan 24, 2021 4:54 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
no problem... |
Author: | wheeliehd [ Sun Jan 24, 2021 6:16 pm ] |
Post subject: | Re: Inexpensive Pop Can Target |
Instead of cardboard behind, plastic corrugated election signs I use in mine like that. Plus it holds back the duct seal, as duct seal when 1 inch thick seems to want to fall for the first little while when first put in. But mine takes 16 bars of duct seal. I collect the plastic signs where ever I can. Keep and eye on ditch's after elections. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |