i've used this for BBs.
| Attachments: |
|
crosman-177-cal-pellet-loader-holds-16-pellets-3.jpg [ 35.36 KiB | Viewed 1221 times ] |
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| Do they make bb loaders that dispense one at a time? https://www.airgunforum.ca/forums/topic90836.html |
Page 1 of 1 |
| Author: | Plinkerton Man [ Tue Feb 08, 2022 12:03 pm ] |
| Post subject: | Do they make bb loaders that dispense one at a time? |
I recently purchased a daisy 499 bb gun. I bought some match grade ammo and the thing is crazy accurate. I know they make speed loaders but does anyone know if they make loaders that dispense one bb at a time? They're called fingers is not the answer I'm looking for. |
|
| Author: | Leon Yrag [ Tue Feb 08, 2022 1:26 pm ] | ||
| Post subject: | Re: Do they make bb loaders that dispense one at a time? | ||
i've used this for BBs.
|
|||
| Author: | Rob27 [ Tue Feb 08, 2022 4:40 pm ] |
| Post subject: | Re: Do they make bb loaders that dispense one at a time? |
I do not have anything that dispenses one at a time. I have a couple homemade tools to help make them easier to handle. I have a piece of aluminum drywall corner bead that I have marked with lines at zero, 5,10, and 15 bb measures. I pour a bunch of bbs into the channel and put my thumb at zero. I tilt the channel back and forth to get a single row of bbs then pinch the 16th so I am then able to pour out 15 bbs. I dispense 15 bbs into each hole in an old plastic insert from a 9mm ammo box. I have a clear piece of plastic (scavenged from a clamshell package from a pistol) that I cut to the right size for the ammo box and held in place with a rubber band. This allows me to slide back the cover by one row, hold my finger over all holes but one, then dump out 15 bbs into my palm. My next tool is a speed loader (sorry, no single dispenser) made from a bit of plastic tube scavenged from an old hand lotion pump. I again have it marked to confirm 15 bbs. I scoop up the bbs from my palm into the tube then can press the end of the tube against the loading port of a magazine and tilt and wiggle as required to get the bbs to load into the mag. I have not needed a single dispenser so I have not thought about that. Maybe could modify the plastic tube with a springy bit that allows bbs to flow when pressed...       
|
|
| Author: | CaptDAR [ Wed Jul 26, 2023 7:39 am ] |
| Post subject: | Re: Do they make bb loaders that dispense one at a time? |
Personally I just use a Bic pen. https://youtu.be/bojuwgDbtvQ |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|