| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| I need an RVA for a 2240 https://www.airgunforum.ca/forums/topic69064-15.html |
Page 2 of 2 |
| Author: | rrdstarr [ Thu Aug 06, 2015 8:00 pm ] |
| Post subject: | Re: I need an RVA for a 2240 |
mooseslayerjc wrote: That looks nicer than the DIY one I made for my disco. I drilled and tapped for a 3/8 bolt and drilled the bolt for the RVA, which is a thumbscrew and nut I originally got from McMaster Carr, but it didn't allow me to change springs on the fly.  I can rebuild that for you if you'd like? |
|
| Author: | mooseslayerjc [ Fri Aug 07, 2015 8:45 am ] |
| Post subject: | Re: I need an RVA for a 2240 |
It works fine and have settled on a spring for now so I am good. I have to undo the bolt to remove the spring, (which isn't often) and the thumbscrew and locking nut work very well. Thanks for the offer. |
|
| Author: | Huck [ Mon Aug 10, 2015 6:55 pm ] |
| Post subject: | Re: I need an RVA for a 2240 |
rrdstarr wrote: joe hickey wrote: The nice thing about the RVA above, is you can actually lessen the preload of the spring because the rva bolt threads out past the normal spring seat of an end plug. All the way in for piercing and out as far as you like for less power and more shot count. I am glad that one I sent you, as a bribe, worked out!  Huck I got the PM and will ship tomorrow! Hi Rick: Did this part ship out yet? Thanks,Huck |
|
| Author: | rrdstarr [ Tue Aug 11, 2015 12:16 am ] |
| Post subject: | Re: I need an RVA for a 2240 |
Will in the morning Huck! Been sick and doing a bunch of tests since Friday to find out what the hell now is wrong!?!?! |
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|