Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Steel field targets (corded reset)
https://www.airgunforum.ca/forums/topic75098.html
Page 1 of 1

Author:  DigitalFx33 [ Sat Jan 14, 2017 9:53 pm ]
Post subject:  Steel field targets (corded reset)

I'm offering to build good and proper field targets (providing a large enough interest)
I have full and almost unlimited use of a cnc plasma cuter at work. I and I alone do the programming and operation of it.

I have built a few prototypes last year and have worked any bugs out of the reset and adjustability of the trip mechanics.
They are all built from 10g hot rolled steel. With variable target diameters
2" 1" and .5" (this is open to other sizes as well.)
Typical shapes will be crow, rabbit, pigeon, raccoon. (open to other shapes of interest)
In order to make this worth my while and yours I'd like to see commitment to 150 targets.
This will keep my and your cost lower.
Realistically I'd like to keep the cost to 25-30.00 per target. (built to last but replacement parts will be available.)
Will include 100' of cord with each target and possibly hold down pegs if I can source or produce them at a reasonable cost.

Anyway this is open for discussion and I hope there is reasonable intrest in this.


Sent from my LG-D852 using Tapatalk

Author:  DigitalFx33 [ Wed Jan 18, 2017 10:22 am ]
Post subject:  Re: Steel field targets (corded reset)

I'm now looking for sombody with experiance with multiple brands of field targets to review mine. I will ship 2 targets to the right person for a full unbias review. Must be able to test with a range of power from non pal .177 to pal rated .22 and at distances up too 50 yards.
After air rifle testing is done feel free to test with .22 rimfire (not required but feel free to do so.)
If interested or if you would like to elect somebody to do so leave a comment below.

Sent from my LG-D852 using Tapatalk

Author:  Barfman [ Thu Jan 19, 2017 1:15 pm ]
Post subject:  Re: Steel field targets (corded reset)

I've shot a lot of field targets, and go to the Mission shoots regularly. I could bring a pair there, and we could cycle them in. They would be tested with a wide range of power, from sub 5 FPE all the way to over 30 FPE.

Let me know if you want to send a set to Vancouver, and I'll make sure to write you a report on them. If they work well, I'm sure I'd want to buy them off you anyhow!

Author:  DigitalFx33 [ Fri Jan 20, 2017 11:03 am ]
Post subject:  Re: Steel field targets (corded reset)

I will let you know.
I already have a tentative plan with another member.

Sent from my LG-D852 using Tapatalk

Author:  CZ-Sniper [ Fri Nov 17, 2017 7:17 pm ]
Post subject:  Re: Steel field targets (corded reset)

Hi,
Do you have any pictures of your field targets?

Author:  jgoodz420 [ Sun Nov 19, 2017 1:45 pm ]
Post subject:  Re: Steel field targets (corded reset)

I would be interested in testing one of your targets; I've shot FT competitively for about 8yrs and shot for Team Canada at the last two World Championships of Field Target. I also produce WFTF certified target testers; have you tested that your targets fall with the equivalent of a 12FPE (muzzle energy) strike at 56yds?

There are not that many target makers out there, if they are made to work in accordance 12FPE guns I am sure you could sell a few of them :drinkers:

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/