| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| need a gun fixed. https://www.airgunforum.ca/forums/topic89126.html |
Page 1 of 1 |
| Author: | pete [ Fri Jul 30, 2021 4:07 pm ] |
| Post subject: | need a gun fixed. |
hey guys. is there any one in the niagara area that works on and can maybe fix a gun that i have. it,s a walther cp88 nickel model. i have no idea what,s wrong with it. it,s not shooting right. i was hoping someone could be within driving distance. i don,t really feel like getting into shipping it. i live near port colborne. give me a p;m if interested. thanks. |
|
| Author: | notec [ Fri Jul 30, 2021 5:18 pm ] |
| Post subject: | Re: need a gun fixed. |
If you had the grips off it, it may be the spring on the right side under the grip......if it pops out the gun wont work. I can walk you through the repair if so...... |
|
| Author: | pete [ Fri Jul 30, 2021 10:29 pm ] |
| Post subject: | Re: need a gun fixed. |
hi n. it seemed to me that the safety was moving different somehow. i,m not really sure. after i put a new co2 in and shot it a few times no air even came out . but after about 7 or 8 times air did come out but not very strong. tomorrow morning i,ll bring it onto my desk under my bright lamp and i,ll take a closer look. thanks. i,ll let you know more then. |
|
| Author: | pete [ Sat Jul 31, 2021 7:29 am ] |
| Post subject: | Re: need a gun fixed. |
the spring is still in. |
|
| Author: | Hobbyman2007 [ Wed Sep 08, 2021 2:43 pm ] |
| Post subject: | Re: need a gun fixed. |
I had one that would not advance the magazine. It needed parts and could only get them at R&R gun repair . I’d offer to fix it but the shipping would more than likely total more than the guns worth. Parts are cheap though but you need lots of patience to work on these type revolver pistols as there are a lot of springs and tiny pins to keep in place. |
|
| Author: | notec [ Wed Sep 08, 2021 3:16 pm ] |
| Post subject: | Re: need a gun fixed. |
Here are a few vids for you to watch...... https://www.youtube.com/watch?v=OU1kifETXBg https://www.youtube.com/watch?v=gSH9Ya0r0p8 |
|
| Author: | pete [ Wed Sep 08, 2021 4:19 pm ] |
| Post subject: | Re: need a gun fixed. |
thanks guys. the last time i tried it it didn,t seem to bad. i just can,t get it to pierce a nice round hole in the co2. i wanted to maybe get some umarex co2 cartridges to try. but they look identical to the daisy ones i,m using anyway. but i think theres more to it than that.i don,t think i wan,t to attempt taking it apart i,m not very good at that. i,m not to worried about it. |
|
| Author: | notec [ Wed Sep 08, 2021 5:01 pm ] |
| Post subject: | Re: need a gun fixed. |
Ahhh that makes a difference.......some guns are co2 fussy....... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|