Mini table vise and a mini hand saw~

View unanswered posts | View active topics

Board index » Off Topic » CAF Bar & Grill

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Mini table vise and a mini hand saw~

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

YepYep

Post subject: Mini table vise and a mini hand saw~

Posted: Sun Sep 13, 2020 5:46 pm

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5149
Location: GTA, ON

Happens to find the mini hand saw from Walmart... Then just received the mini table vise (3 inches) from Amazon...

What an amazing combo to work on the small stuffs ~ right now just can't be too easy to cut the carbon fiber tubes for my air guns~ I believe it can bring me more surprise in the future! [emoji38]

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

Top

pistolero

Post subject: Re: Mini table vise and a mini hand saw~

Posted: Sun Sep 13, 2020 6:17 pm

Joined: Mon Aug 15, 2016 11:00 pm
Posts: 784

I started like that, now I think have 7 vises, but only 1 full size, mostly table top and mini vises. handsaw I tried to limit to 2 small hand saw, because too bulky and hard to tuck away.

Top

Dukemeister

Post subject: Re: Mini table vise and a mini hand saw~

Posted: Sun Sep 13, 2020 6:36 pm

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON

My old supervisor used to say "everyone has at least one vice"; so welcome to the club.
I have one 4" vice in the garage for big stuff and one 3" like yours in the basement for hobbies and the like, and my wife says I have a few more but I'm not sure about them. :oops:

_________________

))))----//----------==
Iacio, ergo sum

Top

YepYep

Post subject: Re: Mini table vise and a mini hand saw~

Posted: Sun Sep 13, 2020 8:33 pm

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5149
Location: GTA, ON

Dukemeister wrote:

Did you hide the other 5 under the closet and forgot?! [emoji38]

Actually the first job for the mini hand saw was cutting the coconuts for my wife before I worked it on the carbon fiber tube..... So she loves that too~ peace of mind.....

Top

leadslinger

Post subject: Re: Mini table vise and a mini hand saw~

Posted: Mon Sep 14, 2020 1:49 pm

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic

Yup, I started with a small portable work bench and a small 4" carpenter vise, when I lived in an apartment. Since then, Now I got a 6" in the garage, and a larger 4" in the basement.

Top

Page 1 of 1

[ 5 posts ]

Board index » Off Topic » CAF Bar & Grill

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum