Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Anyone have or used an Alaskan lumber mill? https://www.airgunforum.ca/forums/topic92037.html |
Page 1 of 1 |
Author: | Dukemeister [ Wed Aug 03, 2022 9:35 am ] |
Post subject: | Anyone have or used an Alaskan lumber mill? |
I have a lot of dead hardwood trees on my property; usually I just chop them up into firewood, but I got interested in rifle stock making and I saw some TV shows where people cut up trees into milled lumber using a chainsaw and an Alaskan saw mill - I think it would be a cool thing to try. Yesterday I saw PA has some parts on sale so I'm wondering if they would be good enough o chop up some logs. I have an ash tree that is about 16-18" diameter and 30-40 feet long that could be milled into usable lumber. Would this be a suitable thing to get. https://www.princessauto.com/en/36-in-l ... 0009035478 or this https://www.princessauto.com/en/36-in-p ... 0008829723 I also found a video showing how to make a top rail using dimensional lumber, I'd follow that route. My intention would be to mill up some planks 2-2.5" thick x 36" or so for stocks and other things. Experience and advice appreciated. https://www.youtube.com/watch?v=zCcBjBXjsG0 |
Author: | Tom in Newcastle [ Wed Aug 03, 2022 2:00 pm ] |
Post subject: | Re: Anyone have or used an Alaskan lumber mill? |
I've have never used an Alakan mill,but have had several thousand feet of cedar pine ash maple and cherry cut by several dif sawers with WoodMizer band saws. The bandsaws are very fast cutting depending on the width of the plank,and you only loose about an 1/8 or3/16 also the cuts are straight(if the sawer is any good) I've tried ripping with saws before and you need to adjust your cutting teeth angles to get good chips,also you loose 3/8-1/2 .and I found it slow,but I did not have a proper set up. If you can get a mill in your yard,you get a whole lot of lumber in a short time in what ever consistant thickness ,width and length.Should be able to get a good sawer around Kingston for anywhere from $50 -$100/hr. And when the job is done the saw is gone,best of all no maintenance or large intial outlay for for new equipment. But if you occasionally get nice logs it's nice to have a rig sitting in the shed... |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |