Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
dianna 48 https://www.airgunforum.ca/forums/topic7258.html |
Page 1 of 2 |
Author: | edgeofheaven [ Wed Sep 13, 2006 10:55 am ] |
Post subject: | dianna 48 |
Anybody knows where to but a dianna 48 non-break barrel in Toronto? thanks |
Author: | Parker_101_ [ Wed Sep 13, 2006 11:32 am ] |
Post subject: | Re: dianna 48 |
edgeofheaven wrote: Anybody knows where to but a dianna 48 non-break barrel in Toronto?
thanks Try MrMarvin, I picked up a couple of Diana's from him last year and he's in the Toronto area..... Here's his PM.... http://www.airgunforum.ca/forum/privmsg ... post&u=114 send him a message with your request..... |
Author: | Krazy Mike [ Wed Sep 13, 2006 11:50 am ] |
Post subject: | |
Hi, A Diana #48 is a Side Break Action Pull...On the Right Side of it Mike... |
Author: | edgeofheaven [ Wed Sep 13, 2006 12:05 pm ] |
Post subject: | |
Krazy Mikey wrote: Hi,
A Diana #48 is a Side Break Action Pull...On the Right Side of it Mike... side break action is hard to play with? what's real difference between side break action and break barrel? |
Author: | Krazy Mike [ Wed Sep 13, 2006 12:27 pm ] |
Post subject: | |
Break Barrel just pulls from the barrel down until it cocks, and side pull is exactly what it sounds like, from the right side. Same thing, just in a different way. My Hatsan #100 is an UnderLever which is basically all the same thing. The only difference between my Diana #48/ my Hatsan #100 is the barrel stays riggid. My Hatsan #55 HV cocks by the barrel down. But there all basically have a similar cocking method. The Diana and the #100 have solid barrels, which seem to be more accurate, because they don't move to cock... Krazy Mikey... |
Author: | edgeofheaven [ Wed Sep 13, 2006 12:43 pm ] |
Post subject: | |
does break barrel or not has sth to do with the velocity? |
Author: | Krazy Mike [ Wed Sep 13, 2006 1:00 pm ] |
Post subject: | |
I'm not sure of what you are asking here. Do you mean is a Break Barrel more powerful then a Side Pull. No The Diana Model #48 stock will average approx: 1150-(fps) Mine does anyways. And You need a PAL to buy one. There are Break Barrel out there that are suppose to shoot at 1250-(fps) but once your over 1050-(fps) your hitting the Sound Barrier, and that what goes BOOM The Diana #48 is one Damned nice AG, in my opinion it's my favorite one, and then my #100. You see if you've got an AG with alot of power you just use heavier Ammo in say a .22cal it creates more (fpe) and don't let it go over 1050-(fps) (fpe)=Foot Pounds of Energy... (fps)=Feet Per Second... If Over the Sound Barrier, and most likely the pellet will tumble, but if a heavier pellet is used, this will stop. And yes a solid Barrel in my opinion is more of an Accuratye AG. Krazy Mikey... |
Author: | edgeofheaven [ Wed Sep 13, 2006 1:08 pm ] |
Post subject: | |
in dianna website I saw 48 .22 shoots around 790 FPS, but in most other website, it shows 900 FPS for .22 pellets. which one is more correct?Usually how do you test the velocity of your gun? |
Author: | Kilgorin_Sniper [ Wed Sep 13, 2006 1:12 pm ] |
Post subject: | |
you use a Chronograph to measure the Velocity of a gun |
Author: | Krazy Mike [ Wed Sep 13, 2006 1:14 pm ] |
Post subject: | Re: Diana #48 |
Hi edgeofheaven, You use an instrument called a Chronograph Y it has two bars coming up like a Y sorta and you shoot between them. And 900-(fps) is more like it. You can get better springs for them then stock. But stock is totally fine with me. Mines a .177cal/4.5mm and it will punch a hole right through a 2"x4"... These airguns are a solidly built AG. And when I first shot mine it was kinda scary, think about it for a minute. It's very capable of killing very easily. But if I buy another one it'll be in .22caliber/5.5mm 100%... Mike... |
Author: | Mulby [ Wed Sep 13, 2006 3:51 pm ] |
Post subject: | |
Mike is right the .22 is the way to go with the 48, I have the .177 and .22 and they are both awesome rifles, but the .22 just packs that much more punch. My .22 does 785fps with 15.9gr JSB's and 830fps with 14.3gr JSB's, the lightest .22 pellet I have is the Gamo Match at about 14gr and the .22 spits them out at around 850fps. My .177 has thousands of shots through it and with all original parts it still does a consistent 900+fps, a new spring would bring that number up to 1000+fps but I like the way it shoots with the old spring. One thing to consider is the fact that these rifles take some time to learn, and break in. So if you get one in either caliber be patient and have fun. HTH, Mulby |
Author: | lotsofsquirrels [ Thu Sep 21, 2006 11:20 pm ] |
Post subject: | |
i don't know if this is true or not, but is the trigger plastic on the 48? and what about that front site thing? (i dunno if it is a break or what the heck it is)is it plastic? and could it be removed? ive also heard things of barrel droop, making it harder to sight in with a scope due to the need for higher elevation? im just wondering about this rifle, been im my mind for awhile....... |
Author: | chops [ Fri Sep 22, 2006 8:47 am ] |
Post subject: | |
lotsofsquirrels wrote: i don't know if this is true or not, but is the trigger plastic on the 48? and what about that front site thing? (i dunno if it is a break or what the heck it is)is it plastic? and could it be removed? ive also heard things of barrel droop, making it harder to sight in with a scope due to the need for higher elevation? im just wondering about this rifle, been im my mind for awhile.......
Yes I beleive the trigger is plastic, I know that the D20, and 24, and 34 have plastic triggers, as for the site i'm not sure, although keep in mind this isn't cheap crosman plastic either. |
Author: | Mulby [ Fri Sep 22, 2006 9:53 am ] |
Post subject: | |
The triggers are made of a very durable plastic, as is the sight base(or muzzle break), but the sight it self is metal. The newest version(T05)has also a plastic safety switch. I have not experienced any failures in any of my Diana AG's. Mulby |
Author: | lotsofsquirrels [ Fri Sep 22, 2006 10:31 am ] |
Post subject: | |
wouldn't a palstic trigger be very brittle in cold weather? i can see the plastic safety being good for hunting use, no metal "clink" when you take the safety off. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |