Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Post your custom airgun targets here!
https://www.airgunforum.ca/forums/topic105-30.html
Page 3 of 6

Author:  Parker_101_ [ Sat Mar 17, 2007 12:59 am ]
Post subject: 

Post your custom airgun targets here! has bee added to the The Resource Centre
Keep the targets coming folks.....Thanks!....

Author:  BCGunner [ Sat Mar 17, 2007 9:11 am ]
Post subject: 

Heres one I found. My parents got a big kick out of it ( they were POW's during WW2 ). NOT P.C. hehehe.
Image

Author:  Parker_101_ [ Wed Mar 21, 2007 5:15 pm ]
Post subject: 

Recently added... Printable Rifle & Pistol Targets has bee added to the The Resource Centre

Author:  GreenLantern420 [ Sun Jul 29, 2007 5:21 pm ]
Post subject:  some other good targets

http://patriotarmsinc.com/dialres/freetargets.htm

I didn't see these listed some really good ones here.

Author:  Berny V [ Mon Oct 29, 2007 6:36 am ]
Post subject:  Field target

Hi ,my attempt to build a field target :D
Image
Image
Image
Image
2 size hole ,2 in and 1 in
Image
And the final product! :wink:
Image
and it work well :)

Author:  rsterne [ Mon Nov 12, 2007 8:11 pm ]
Post subject:  Ruffed Grouse Target

I asked if anyone had one of these.... the response was deafening, so I made my own.... :) .... According to my "Birds of Canada" book, the Ruffed Grouse is 17" long and stands about 14" tall.... this target is half that size, and prints on 8 1/2 x 11 paper from MS Word.... The Word file has 1/2" to 2" target rings overlaid.... I suggest using 67 lb. or 110 lb. card stock.... Enjoy :lol:

Image

http://www.airgunforum.ca/upload/4374/target_grouse.doc

Bob

Author:  krossmankid [ Tue Feb 26, 2008 11:20 am ]
Post subject: 

Indoor Range
Image
kk

Author:  losttourist [ Wed Mar 12, 2008 1:32 pm ]
Post subject:  Sick day quick build

Hello folks
well I stayed home from work with the flu. Was bored and decided to do a quick project. Here is my home made target box with spinners. It's a little rough to look at but like I said I put it together quick. Im pretty happy with it.
Here it is with paper target attached as one option
Image

Here are the spinning targets
Image

Another angle, omg is that a teflon cookie sheet?!! Yes it is from the dollar store. :oops:
Image

thanks for looking

Author:  pitwipe [ Wed Apr 02, 2008 10:58 am ]
Post subject: 

Does anyone have any Zombie paper targets? I think I'd like to take out a few zombies. Obviously only head shots would count!

Author:  vAgRaNt [ Wed Apr 02, 2008 11:26 am ]
Post subject: 

Quote:
Does anyone have any Zombie paper targets?

PM 'Mantis', he's the resident 'Zombie' expert. :lol:

Author:  CZ-Sniper [ Sat May 16, 2009 5:17 am ]
Post subject:  Re: Post your custom airgun targets here!

By far my FAVOURITE place for free targets. I've been to many websites, and there are some really awesome ones here:

WARNING, MAY BE SLOW ON CRAPPY CONNECTIONS:

http://www.dundeesportsmansclub.com/dun ... argets.htm

CZ

Author:  SoBored [ Fri Jun 19, 2009 10:23 am ]
Post subject:  Zombies!

Headshots only!

GRAY 8.5x11
http://i318.photobucket.com/albums/mm42 ... RAY100.jpg

COLOR 8.5x11
http://i318.photobucket.com/albums/mm42 ... RGB100.jpg

Author:  backyard blaster [ Fri Jun 19, 2009 1:11 pm ]
Post subject:  Re: Post your custom airgun targets here!

Hey everyone, this is my "shooting range" and home made pellet traps and target holders, and one custom zombie target :twisted: :axe:

I usually also have a little table for holding cans, coins, paint balls and other things, but I had to throw it out because something gnawed one of the legs off it... I will post a plan instead.


pictures of the targets, closest being my homemade 3 target trap, next being a large chunk of soft wood, and further is my "sighting in" 2 target holder.
Image

from the back

Image



Not much of a "trap"...

Image
Image



Firing position 1, ~60' from target, up on balcony.

Image

Firing position 2, ~50' from target, level with target on chair

Image



here's some plans for the target table, pretty simple to make, but a helluva lot of fun, I would suggest replicating this to anyone who likes challenging targets for dirt cheap. If you can't make it out in the picture, that block of wood in the front had holes in it that fit golf ball T's, and the the paint balls just sit on those, you can put cans OR bottles or whatever on the table, and then staple or tape targets to the backboard, and also not visible there is a third leg that is glued to the backboard so that it is stable on almost all surfaces.

EDIT : this table can be made ENTIRELY out of 2x4's and 3/4" plywood or chip board, some screws and some glue, Total build time from pencil and paper to target minus drying time was only about an hour, I did not add any dimensions because you may want to do something else like make it longer or remove the backboard or add whirligigs of your choosing, or just make the legs out of something that will not get gnawed and ruin the whole thing.

Image

and last and probably least, zombie target for the table :twisted: should fit standard 8.5x11 paper, I don't know how photobucket resizes though...
Image


Sorry for all the pics, and making such a long message :mrgreen:

Author:  levi garrett [ Mon Oct 19, 2009 1:44 pm ]
Post subject:  Re: Post your custom airgun targets here!

is their a paper that is available for printing those wonderful targets , one could buy , and run thru a copy machine. For better quality , and results on paper (not accuracy) :D :butthead: :wink:

Author:  NBLongRanger [ Thu Dec 17, 2009 12:25 am ]
Post subject:  Re: Post your custom airgun targets here!

My backyard range

Attachments:
IMGP0373edit.jpg
IMGP0373edit.jpg [ 76.71 KiB | Viewed 8592 times ]

Page 3 of 6 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/