| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| M29 https://www.airgunforum.ca/forums/topic90206-45.html |
Page 4 of 6 |
| Author: | Canadianguy [ Sun Nov 28, 2021 11:07 am ] |
| Post subject: | Re: M29 |
Hey Paddy, someone was asking me if these black ones are black electro-plated? |
|
| Author: | paddyfritz [ Sun Nov 28, 2021 11:13 am ] |
| Post subject: | Re: M29 |
Canadianguy wrote: Hey Paddy, someone was asking me if these black ones are black electro-plated? I would assume that is how they are doing it. It would be the same as the blued or nickel SAA only it's much blacker than the blued ones. |
|
| Author: | paddyfritz [ Tue Nov 30, 2021 7:40 am ] |
| Post subject: | Re: M29 |
Canadianguy wrote: Hey Paddy, someone was asking me if these black ones are black electro-plated? Perhaps a comparison will help with the color. Daisy is chrome. Crosman's are black paint. They have not approved me to post over where they were asking.  
|
|
| Author: | Canadianguy [ Tue Nov 30, 2021 5:59 pm ] |
| Post subject: | Re: M29 |
Nice! I had that bottom Crosman in .22 in the 70's. I had the Daisy in Black too. |
|
| Author: | Daryl [ Wed Dec 01, 2021 12:16 am ] |
| Post subject: | Re: M29 |
The finish on that model 29 replica looks pretty good. What does it weigh, please? |
|
| Author: | paddyfritz [ Wed Dec 01, 2021 6:08 am ] |
| Post subject: | Re: M29 |
Daryl wrote: The finish on that model 29 replica looks pretty good. What does it weigh, please? The finish is only a few microns thick, so I would say it does not weigh much at all.  My postal scale died so I can't weigh the pistol for you, but the box says 2.45 lb. |
|
| Author: | Canadianguy [ Wed Dec 01, 2021 12:19 pm ] |
| Post subject: | Re: M29 |
Finally scraped some up to make a purchase today:) |
|
| Author: | paddyfritz [ Wed Dec 01, 2021 12:50 pm ] |
| Post subject: | Re: M29 |
Canadianguy wrote: Finally scraped some up to make a purchase today:) I'm sure you will like it. |
|
| Author: | Canadianguy [ Wed Dec 01, 2021 1:02 pm ] |
| Post subject: | Re: M29 |
Are using the pellet shells or bbs? Does the speed loader look the same? I also added 6 Colt Peacemaker pellet shells for it, good for now. |
|
| Author: | paddyfritz [ Wed Dec 01, 2021 1:18 pm ] |
| Post subject: | Re: M29 |
Canadianguy wrote: Are using the pellet shells or bbs? Does the speed loader look the same? I also added 6 Colt Peacemaker pellet shells for it, good for now. You get the pistol, 6bb shells, and a manual. No speed loader. I have not fired it. |
|
| Author: | Daryl [ Wed Dec 01, 2021 2:03 pm ] |
| Post subject: | Re: M29 |
paddyfritz wrote: Daryl wrote: The finish on that model 29 replica looks pretty good. What does it weigh, please? The finish is only a few microns thick, so I would say it does not weigh much at all. My postal scale died so I can't weigh the pistol for you, but the box says 2.45 lb. Funny . tks 2.45pounds = 39.2 ounces, so close to the weight of my 4" M29. That's a decent weight.
|
|
| Author: | Canadianguy [ Thu Dec 02, 2021 1:17 pm ] |
| Post subject: | Re: M29 |
paddyfritz wrote: Canadianguy wrote: Are using the pellet shells or bbs? Does the speed loader look the same? I also added 6 Colt Peacemaker pellet shells for it, good for now. You get the pistol, 6bb shells, and a manual. No speed loader. I have not fired it. Do you know how long the barrel is? Is it 8 3/8" like it says. Do you measure from the front of the cylinder? Mine is in the mail, it says tommorow:) It's not a big deal, I have to walk 3 blocks but I wish pkgs I get, that require signature is I could have a choice ether to leave it in my maibox the box is key locked or pick up from PO after 5pm. After 5 I don't like....oh well:) |
|
| Author: | paddyfritz [ Thu Dec 02, 2021 1:28 pm ] |
| Post subject: | Re: M29 |
Canadianguy wrote: paddyfritz wrote: Canadianguy wrote: Are using the pellet shells or bbs? Does the speed loader look the same? I also added 6 Colt Peacemaker pellet shells for it, good for now. You get the pistol, 6bb shells, and a manual. No speed loader. I have not fired it. Do you know how long the barrel is? Is it 8 3/8" like it says. Yes Do you measure from the front of the cylinder? Yes Mine is in the mail, it says tommorow:) It's not a big deal, I have to walk 3 blocks but I wish pkgs I get, that require signature is I could have a choice ether to leave it in my maibox the box is key locked or pick up from PO after 5pm. After 5 I don't like....oh well:) Stephen Archer says they shoot well with pellets. |
|
| Author: | Canadianguy [ Thu Dec 02, 2021 1:47 pm ] |
| Post subject: | Re: M29 |
I will have to try it, I'll get back. Thanks |
|
| Author: | Canadianguy [ Mon Dec 06, 2021 9:00 am ] |
| Post subject: | Re: M29 |
My order was suppse to be Fri, then I would have to go to the PO, they dropped it off at my door today instead! Other then hollow handle feel a fingerprint easy, nothing I don't like! it really is a beautiful replica.This is the revolver i always have been looking for since the .357 ones were coming out in the 80's. The hammer is solid, probably the best hammer I ever felt on any of the revovers that have come out with. No wobble what so ever. Trigger feels tight too. You know i thought it would be to big but for this revover it should be bad buttock with 8 3/8. the 715 feels like it's heavier then the M29. Attachment: 20211205_155701_resized.jpg [ 258.61 KiB | Viewed 443 times ] Attachment: 20211205_144150_resized.jpg [ 243.3 KiB | Viewed 443 times ] Attachment: 20211205_143719_resized.jpg [ 433.13 KiB | Viewed 443 times ] |
|
| Page 4 of 6 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|