Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Tue Jul 23, 2019 11:04 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Apr 06, 2010 5:11 pm 
Offline
User avatar

Joined: Sun Jun 11, 2006 8:43 pm
Posts: 1764
Location: Montreal, Quebec.
for the Crosman or Disco valves...

_________________
Image


Top
 Profile  
 
PostPosted: Wed Apr 07, 2010 10:10 am 
Offline

Joined: Tue Dec 15, 2009 4:49 pm
Posts: 722
Bare tube?
Hydraulic shops.
Specifically, Swaglok dealers. I know the brand well and trust they're ratings.

The Swaglok stores however hate selling /ft though, so a hydraulic shop is your best bet.
JFYI: 1.25OD/.120wall/1.010"ID = $20/ft in 316SS(Rated 3600psi)
and it weighs about 5-6lbs... I went SS because I HATE rust.

Carbon steel tubing is in the same strength range as SS just alot cheaper and requires enviromental coating.

_________________
- QB79 - CenterPoint 3-9x40 - 660fps - Zero'd @ 75yrds
- PCP2.0 - 480fps with "no" breech seal on the bolt on CO2


Top
 Profile  
 
PostPosted: Wed Apr 07, 2010 10:17 am 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6834
Location: Rocky Mtn Hse Alberta
NBLongRanger wrote:
Bare tube?
Hydraulic shops.
Specifically, Swaglok dealers. I know the brand well and trust they're ratings.

The Swaglok stores however hate selling /ft though, so a hydraulic shop is your best bet.
JFYI: 1.25OD/.120wall/1.010"ID = $20/ft in 316SS(Rated 3600psi)
and it weighs about 5-6lbs... I went SS because I HATE rust.

Carbon steel tubing is in the same strength range as SS just alot cheaper and requires enviromental coating.


..... Swagelok ..... spell it Swagelok .......


What you want is 4130 DOM 0.875" x 0.065" wall tubing. Check at MetalsSupermarket as they will sell by the foot.
You will want to look over the piece you buy for scratchs and gouges as they are not very careful with that stuff in transit.
Refuse to buy damaged tubing.

Walter....

_________________
Image
Walter


Top
 Profile  
 
PostPosted: Wed Apr 07, 2010 4:23 pm 
Offline
User avatar

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 2798
Location: Canada
[quote="Voltar1"]..... Swagelok ..... spell it Swagelok .......quote]


:lol: :lol:

They charged me by the inch. Might have changed their policy...or maybe they just like you better. :)

49" (two tubes worth) was ~$44+gst and shipping.

Al


Top
 Profile  
 
PostPosted: Wed Apr 07, 2010 4:30 pm 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6834
Location: Rocky Mtn Hse Alberta
Gippeto wrote:
Voltar1 wrote:
..... Swagelok ..... spell it Swagelok .......quote]


:lol: :lol:

They charged me by the inch. Might have changed their policy...or maybe they just like you better. :)

49" (two tubes worth) was ~$44+gst and shipping.

Al


looks to be the same price, $12/foot and I bought 20 ft of it. need to get some more as I'm getting low :) Nice stuff if you can inspect it before they cut it.

Walter....

_________________
Image
Walter


Top
 Profile  
 
PostPosted: Wed Apr 07, 2010 7:11 pm 
Offline
User avatar

Joined: Wed Mar 26, 2008 7:12 pm
Posts: 2368
Location: Woodstock
I have 4130 and 304 seamless tube on hand. If you are serious Kinetic, PM me and we can figure something out.
The 304 shines, but the 4130 takes a good blue...
I just don't want to see the rear let go on that airgun...

_________________
Daisy Red Ryder


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO