Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Fri Nov 22, 2019 5:40 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sun Mar 31, 2013 2:21 pm 
Offline
User avatar

Joined: Wed Nov 04, 2009 9:38 am
Posts: 588
Location: Kitchener / Waterloo
Just wondering if anyone had used EZ Liner on any gun stocks before.

http://www.canadiantire.ca/AST/browse/4/Auto/AutoBodyRepair1/AutoBodyPaintProtectants/PRD~0475608P/EZ+Liner+Aerosol+Coating.jsp?locale=en

I am wanting to add some extra grip to a stock I have and thought this would work. I thought I could use it like spray paint. Tape off and spray the areas I need to get extra grip on.

Jeff.

_________________
Some people are like slinkies, not much good for anything but they put a smile on your face when you push them down the stairs.


Make a fast friend. Adopt a greyhound.
WAGG. Waterloo Area Greyhound Group.


Top
 Profile  
 
PostPosted: Sun Mar 31, 2013 3:29 pm 
Offline
User avatar

Joined: Wed Jul 01, 2009 3:23 pm
Posts: 3067
Location: Northern Ontario
Top gun in this photo was sprayed with that.
Image
Light sanding and spray away.

_________________
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.


Top
 Profile  
 
PostPosted: Sun Mar 31, 2013 7:20 pm 
Offline
User avatar

Joined: Sun Aug 19, 2007 3:12 am
Posts: 769
Location: Oshawa, Ontario
I have done Bedliner finishes on 3 rifles using different brands, results were pretty good. The texture is totally up to you depending on how you apply it. Do a search on the forum for others results

GT

_________________
QB.30 PCP w/ Leapers Bug Buster 4x32AO Mil-Dot
QB78D .22 w/ Leapers 3-9x40AO Mil-Dot
QB78 .22 Custom HFT Stock w/ Leapers 3-9x40AO Mil-Dot
Crosman 1100
Crosman 2240
Custom 2050
Brass M2250
Tanfoglio 1911


Top
 Profile  
 
PostPosted: Sun Mar 31, 2013 10:13 pm 
Offline
User avatar

Joined: Sat Nov 06, 2010 8:53 am
Posts: 6475
Location: Montreal
Would plasti dip be better? It could be removed if you get tired of it or if gets damaged and I think it's available in more colors...

_________________
Facebook is like ancient Egypt, people write on walls and worship cats

You can’t buy a single airgun for everything. Golfers use many different clubs, airgunners need more than one gun


Top
 Profile  
 
PostPosted: Mon Apr 01, 2013 6:28 am 
Offline
User avatar

Joined: Wed Nov 04, 2009 9:38 am
Posts: 588
Location: Kitchener / Waterloo
I looked at Plasti Dip and EZ Liner was recommended over it. I will be using it on the forestock and plam swell of a composite stock. I do not want it to peal off. How easily does Plasti Dip come off ?

Does the EZ Liner stay tacky or will it loose some over time ?

Jeff.

_________________
Some people are like slinkies, not much good for anything but they put a smile on your face when you push them down the stairs.


Make a fast friend. Adopt a greyhound.
WAGG. Waterloo Area Greyhound Group.


Top
 Profile  
 
PostPosted: Mon Apr 01, 2013 6:40 am 
Offline
User avatar

Joined: Wed Jul 01, 2009 3:23 pm
Posts: 3067
Location: Northern Ontario
Dont tell my wife wrote:
I looked at Plasti Dip and EZ Liner was recommended over it. I will be using it on the forestock and plam swell of a composite stock. I do not want it to peal off. How easily does Plasti Dip come off ?

Does the EZ Liner stay tacky or will it loose some over time ?

Jeff.


It is not tacky, but you can make it very textured if you want.

_________________
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.


Top
 Profile  
 
PostPosted: Mon Apr 01, 2013 11:56 pm 
Offline
User avatar

Joined: Sat Dec 17, 2011 10:04 pm
Posts: 526
Location: Komoka Ont.
I have used that exact product on one rifle and I will use it again on the next one. The texture is controlled by how far you hold the can away, I was about 18" away when I got the texture I liked. It was easy to use but it is pretty noxious stuff,I wouldn't use it without good ventilation. The best part is that you will need several coats so you can practice with each coat and the texture can be altered with each coat if you don't like one then just recoat with a different distance and the texture will change with a single application or at least thats how it worked for me. You will need to prime it first, I used grey metal primer it worked well but its up to you of course. Good luck.

_________________
When the chips are down, the buffalo is empty.


Top
 Profile  
 
PostPosted: Tue Apr 02, 2013 5:36 am 
Offline
User avatar

Joined: Wed Nov 04, 2009 9:38 am
Posts: 588
Location: Kitchener / Waterloo
Thanks for the input. I might try the Plasti Dip. It comes in clear which might work better for me.

Jeff.

_________________
Some people are like slinkies, not much good for anything but they put a smile on your face when you push them down the stairs.


Make a fast friend. Adopt a greyhound.
WAGG. Waterloo Area Greyhound Group.


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 9:03 am 
Offline
User avatar

Joined: Fri Feb 17, 2012 12:44 pm
Posts: 501
Location: Southern Ontario
I sell Plasti dip at my work, it peels off pretty easy and there is no touching it up once it does. If you want a temporary covering then the plasti dip is fine, but it's not really permanent. Plus it seems to cost a lot for what it is. It comes in pink though.


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 9:09 am 
Offline
User avatar

Joined: Sat Nov 06, 2010 8:53 am
Posts: 6475
Location: Montreal
cdnairgunner wrote:
I sell Plasti dip at my work, it peels off pretty easy and there is no touching it up once it does. If you want a temporary covering then the plasti dip is fine, but it's not really permanent. Plus it seems to cost a lot for what it is. It comes in pink though.

Have you seen the guys doing complete cars with the thing? Looks pretty good if you like a matte car color. I wanted to do the summer rims on the wife passat but she prefers the chrome look... obviously she's not the one who has to clean them.

_________________
Facebook is like ancient Egypt, people write on walls and worship cats

You can’t buy a single airgun for everything. Golfers use many different clubs, airgunners need more than one gun


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 9:35 am 
Offline
User avatar

Joined: Wed Jul 01, 2009 3:23 pm
Posts: 3067
Location: Northern Ontario
I would not put plasti dip on wood. I find it does not work that well on tools.

_________________
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 4:24 pm 
Offline
User avatar

Joined: Fri Feb 17, 2012 12:44 pm
Posts: 501
Location: Southern Ontario
We sell it at work for rims, and guys do try to do complete cars. The problem is that it lifts around the edges and then you are screwed.... you can't touch it up, all you can do is peel it off and re-spray the whole panel or whatever. Seems like a waste for what it costs!


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 9:39 pm 
Offline
User avatar

Joined: Sat Nov 06, 2010 8:53 am
Posts: 6475
Location: Montreal
cdnairgunner wrote:
We sell it at work for rims, and guys do try to do complete cars. The problem is that it lifts around the edges and then you are screwed.... you can't touch it up, all you can do is peel it off and re-spray the whole panel or whatever. Seems like a waste for what it costs!

At 50$ per gallon for a whole car it's seems pretty cheap to me. You buy a white car and when you're tired you make it blue and when you hand it over to your wife your repaint it pink.
https://www.dipyourcar.com/
If there was less rust on my truck I'd paint it flat black with the tainted paint over the back lights.

_________________
Facebook is like ancient Egypt, people write on walls and worship cats

You can’t buy a single airgun for everything. Golfers use many different clubs, airgunners need more than one gun


Top
 Profile  
 
PostPosted: Fri Apr 05, 2013 5:42 am 
Offline
User avatar

Joined: Wed Nov 04, 2009 9:38 am
Posts: 588
Location: Kitchener / Waterloo
I guess my question would be will it stay tacky ? I want to use it on the pump of a pump action shotgun for extra grip. If it peels off every time I go out that is not good either.

Jeff.

_________________
Some people are like slinkies, not much good for anything but they put a smile on your face when you push them down the stairs.


Make a fast friend. Adopt a greyhound.
WAGG. Waterloo Area Greyhound Group.


Top
 Profile  
 
PostPosted: Fri Apr 05, 2013 10:54 am 
Offline

Joined: Thu Dec 15, 2011 11:24 am
Posts: 331
Concerning the EZLiner...once dry, does it have a rubbery feeling touch or a hard PVC feeling touch?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO