Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Nov 21, 2019 3:49 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Sun May 12, 2013 1:53 pm 
Offline
User avatar

Joined: Thu Mar 15, 2012 6:38 pm
Posts: 1267
Location: Near London Ontario
Well I took the AT out of her stock, got a nice long 4mm allen and found the spring adjuster. I can see something turning through the little hole in the bottom, but it NEVER stops turning or tightens up. I could turn it till I'm blue in the face. I either have something defective in the gun or it is by design, however, I believe defect as how do you know what 2 turns from all the way CW is?

Any advice sure would be appreciated.

_________________
Airgun Addicted since 2012!


Top
 Profile  
 
PostPosted: Sun May 12, 2013 2:00 pm 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6845
Location: Rocky Mtn Hse Alberta
Chewy wrote:
Well I took the AT out of her stock, got a nice long 4mm allen and found the spring adjuster. I can see something turning through the little hole in the bottom, but it NEVER stops turning or tightens up. I could turn it till I'm blue in the face. I either have something defective in the gun or it is by design, however, I believe defect as how do you know what 2 turns from all the way CW is?

Any advice sure would be appreciated.

There is a hole to put a pin or 2mm ish Allen to stop the hammer from turning
Think it is where you were peaking into tube

_________________
Image
Walter


Top
 Profile  
 
PostPosted: Sun May 12, 2013 2:01 pm 
Offline
User avatar

Joined: Fri Dec 30, 2005 2:14 am
Posts: 1680
Location: Calgary, Alberta
This will help you. Topic48843

_________________
"The key to immortality is first living a life worth remembering."

Bruce Lee


Top
 Profile  
 
PostPosted: Sun May 12, 2013 2:23 pm 
Offline

Joined: Sat Feb 28, 2009 12:28 pm
Posts: 662
Do a search and read the posts a few times,lots of good info out there..kelly


Top
 Profile  
 
PostPosted: Sun May 12, 2013 4:55 pm 
Offline
User avatar

Joined: Thu Mar 15, 2012 6:38 pm
Posts: 1267
Location: Near London Ontario
Voltar1 wrote:
Chewy wrote:
Well I took the AT out of her stock, got a nice long 4mm allen and found the spring adjuster. I can see something turning through the little hole in the bottom, but it NEVER stops turning or tightens up. I could turn it till I'm blue in the face. I either have something defective in the gun or it is by design, however, I believe defect as how do you know what 2 turns from all the way CW is?

Any advice sure would be appreciated.

There is a hole to put a pin or 2mm ish Allen to stop the hammer from turning
Think it is where you were peaking into tube

Saw that hole thanks!

Very excited to get a good high power tube set up.

_________________
Airgun Addicted since 2012!


Top
 Profile  
 
PostPosted: Sat Jun 01, 2013 6:08 pm 
Offline

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1029
Location: Southern canada
Can someone help me out with this hammer adjustment. How long and what size of Allen key do I need to access the tensioning adjuster? My standard length Allen's just won't reach. Thanks

_________________
Benjamin Classic
Benjamin Trail NP
Webley Alecto .177 (Custom)
Smith & Wesson 686
Hatsan AT44MW-10 .177
Daisy 953S


Top
 Profile  
 
PostPosted: Sat Jun 01, 2013 6:31 pm 
Offline
User avatar

Joined: Sat Nov 03, 2007 4:19 pm
Posts: 8979
Location: Coalmont BC
You need a VERY long 4mm Allen Key.... The one I made is 7" long, I can't tell you if a 6" long one would work or not.... I cut the short end off a 4mm key and soldered the long end into a piece of 3/16" brass tubing to make it long enough.... There is a photo here.... topic48843.html

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal;
Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO