Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Nov 21, 2019 10:39 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Hipac fitting
PostPosted: Wed Jul 10, 2013 7:36 am 
Offline

Joined: Sun Jan 23, 2011 3:05 pm
Posts: 18
Thanks Jack.
You are a good people!


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Wed Jul 10, 2013 8:59 am 
Offline

Joined: Fri Jan 08, 2010 6:58 am
Posts: 887
So you are OK, now?
Because it is hard to try and understand how you are confused, if you have already in your possession a couple of PCP.
It always help if you can give a description or picture of what you are confused about.

Good Luck.

_________________
President and CEO of Procrastinator Unlimited.

Arsenal..
Kraft Marshmallow Pump and Shoot Rifle.
GoodYear Gatling Gun rubber-band shooter.
PEI Potato PCP Rifle.

Glass ..12" Dobsonian Reflector.
Shooting for the Stars.


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Thu Jul 11, 2013 12:13 am 
Offline

Joined: Sun Jan 23, 2011 3:05 pm
Posts: 18
I hope I'm good.
Ordered the fitting....lets see if it works.
The confusion is, there is no way to identify the fitting on the hipac site.
No name, or description.
Alex is not the type of person to give more than a two word answer, and he didn't think it necessary to volunteer this bit of info.
If you ever try buy a boring old drill from me......I'm going to upsell you into batteries, bits, holster, belt hook, and a kitchen sink.


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Thu Jul 11, 2013 12:15 am 
Offline
User avatar

Joined: Sun Jul 15, 2012 10:49 am
Posts: 6029
Location: Victoria, BC and Clarkston, WA
Toolguy wrote:
I hope I'm good.
Ordered the fitting....lets see if it works.
The confusion is, there is no way to identify the fitting on the hipac site.
No name, or description.
Alex is not the type of person to give more than a two word answer, and he didn't think it necessary to volunteer this bit of info.
If you ever try buy a boring old drill from me......I'm going to upsell you into batteries, bits, holster, belt hook, and a kitchen sink.



My apologies too! Thought you were being lazy and not doing your own research! You just genuinely didn't know!

_________________
-Rick
Pardini K10
Brocock Concept .22
3 Custom Crosman 2260
Benjamin Discovery .22 w/Joe Hickey stock!
Crosman 150 pistol .22
4 Crosman MK 1 pistol .22
Mrodair CP-1M .22 and .177


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Thu Jul 11, 2013 12:37 am 
Offline

Joined: Tue Oct 30, 2012 7:46 pm
Posts: 15
Location: Montreal
Toolguy wrote:
I hope I'm good.
Ordered the fitting....lets see if it works.
The confusion is, there is no way to identify the fitting on the hipac site.
No name, or description.
Alex is not the type of person to give more than a two word answer, and he didn't think it necessary to volunteer this bit of info.
If you ever try buy a boring old drill from me......I'm going to upsell you into batteries, bits, holster, belt hook, and a kitchen sink.


hi Toolguy,
i just got a hipac and like it very much, i'm sure you will enjoy it also.
I had an initial problem with mine and he answered my concerns the same day on his forum. although he probably should have tried to answer you're questions more clearly it does state on his web site.
''Built-in "Foster" style fill-nipple, internal check-valve'' .
cheers, craiger


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Thu Jul 11, 2013 10:08 am 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6845
Location: Rocky Mtn Hse Alberta
Stock 22XX to 2Kpsi. Modified 22XX to 3Kpsi.
The HiPAC handles pressure to 3000psi.
Whether you prefer HPA, N2 or CO2 the HiPAC is all you need.
Built-in "Foster" style fill-nipple, internal check-valve .
Made in the U.S.A.




All that info front and center on his web page.

_________________
Image
Walter


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Thu Jul 11, 2013 10:09 am 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6845
Location: Rocky Mtn Hse Alberta
Toolguy wrote:
I hope I'm good.
Ordered the fitting....lets see if it works.
The confusion is, there is no way to identify the fitting on the hipac site.
No name, or description.
Alex is not the type of person to give more than a two word answer, and he didn't think it necessary to volunteer this bit of info.
If you ever try buy a boring old drill from me......I'm going to upsell you into batteries, bits, holster, belt hook, and a kitchen sink.


front and center

http://www.powermax-hipac.com/Pages/default.aspx

Stock 22XX to 2Kpsi. Modified 22XX to 3Kpsi.
The HiPAC handles pressure to 3000psi.
Whether you prefer HPA, N2 or CO2 the HiPAC is all you need.
Built-in "Foster" style fill-nipple, internal check-valve .
Made in the U.S.A.

_________________
Image
Walter


Top
 Profile  
 
 Post subject: Re: Hipac fitting
PostPosted: Tue Jul 16, 2013 8:49 am 
Offline

Joined: Fri Sep 09, 2005 11:55 am
Posts: 231
Location: England.
The Pyramidair is the Foster fitting nipple. Only Daystate use them over here without the valve.

The most popular type is whats regarded as the older AA type nipple and coupler with or without valves. These are an off the shelf item I forget whether its type O or A type ones 1/8"BSP the others 1/4" BSP.
http://www.bestfittings.co.uk/shopexd.asp?id=148
http://www.bestfittings.co.uk/shopexd.asp?id=149
If get from some where else these are in various pressure ratings from literally working pressure to the best at 320bar.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO