Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Nov 20, 2019 6:31 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: 1322 old vs new
PostPosted: Sun Mar 30, 2014 6:09 am 
Offline

Joined: Fri Nov 02, 2012 7:55 am
Posts: 298
Picked up an old school 1322 for parts. Cocking plunger style. What parts are and are not interchangeable with modern 1322?


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Sun Mar 30, 2014 7:59 pm 
Offline

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA
Grip frames, pump parts, and valve will interchange. The barrels are slightly different, the pump tube is not slotted for a cocking pin.


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Sun Mar 30, 2014 8:21 pm 
Offline
User avatar

Joined: Wed Dec 21, 2005 11:27 pm
Posts: 2079
Location: Toronto
I have a 1322 classic (old knob type) converted to a modern bolt type by its previous owner.

You need would need these parts (new) to convert:

-transfer port
-rear metal tube cap
-hammer with cocking pin
-hammer spring (maybe)
-bolt & breech

I think that's pretty much it....

I would just tune the old 1332 up, they are cool in their stock configuration.

_________________
"...await the right moment for one, and only one well-aimed shot" - Vassili Zaitsev


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 11:29 am 
Offline

Joined: Fri Nov 02, 2012 7:55 am
Posts: 298
the barrels are slightly different...

but will the old school barrel go onto new school guns?

1322/2289?
2240?


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 1:14 pm 
Offline
User avatar

Joined: Wed Dec 21, 2005 11:27 pm
Posts: 2079
Location: Toronto
The barrel is the same as the new 1322 barrel. It will not fit the 2289 band, but maybe the 2240 one.

_________________
"...await the right moment for one, and only one well-aimed shot" - Vassili Zaitsev


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 3:44 pm 
Offline

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA
The barrel differences have to do with the feed ramp and O-ring seal area. The angles are different due to the bolt diameters being larger on the older guns. I just made a new breech to put a new barrel on an older gun.
Image

Image


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 3:50 pm 
Offline
User avatar

Joined: Sun Jul 15, 2012 10:49 am
Posts: 6029
Location: Victoria, BC and Clarkston, WA
LOL! Bart I think you need a bigger and better bolt handle!

Nice looking breech!

_________________
-Rick
Pardini K10
Brocock Concept .22
3 Custom Crosman 2260
Benjamin Discovery .22 w/Joe Hickey stock!
Crosman 150 pistol .22
4 Crosman MK 1 pistol .22
Mrodair CP-1M .22 and .177


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 5:55 pm 
Offline

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA
rrdstarr wrote:
LOL! Bart I think you need a bigger and better bolt handle!


Why? :mrgreen: It's unobtrusive and only loads the pellet and locks the bolt. Anything bigger will just be in the way. The gun is a rear cocker.

Quote:
Nice looking breech!


Thanks, It only took about 4 hours on the old Atlas. :mrgreen:


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 7:17 pm 
Offline
Supporting Member 2009
User avatar

Joined: Sun Dec 24, 2006 12:37 am
Posts: 3468
Location: Out There
Big Bore Bart wrote:
The barrel differences have to do with the feed ramp and O-ring seal area.


That is true enough, but some of the very late versions of the rear-cocking knob guns used a barrel equivalent to the ones being used for the last 10-15 years- so it's a bit of a 'crap-shoot' and depends on the specific gun.

_________________
www.scopesandammo.com/storefront



Please note: I do not conduct business through Private Messages (PM's) in online forums. Please do not send a 'PM" with a business-related question.


Top
 Profile  
 
 Post subject: Re: 1322 old vs new
PostPosted: Mon Mar 31, 2014 11:15 pm 
Offline

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA
I'll accept that. :drinkers: The biggest reason I can find for the difference is that, the slide breech guns have a 5/16" OD bolt, while the new guns have a 1/4" OD bolt. This changes the sealing angle of the bolt nose. Using an older barrel with a new breech does not seem to be a problem, it's going the other way, as the angle usually won't let the bolt close.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO