Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Tue Nov 19, 2019 11:04 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sun Sep 21, 2014 7:53 pm 
Offline

Joined: Sat Aug 30, 2014 1:21 pm
Posts: 15
How do you remove the end cap that holds the hammer spring?

Also: Is there any reason to degas the Scorpion before adjusting the hammer spring tension?


Top
 Profile  
 
PostPosted: Sun Sep 21, 2014 8:07 pm 
Offline

Joined: Sat Feb 28, 2009 12:28 pm
Posts: 662
UncleWayne wrote:
How do you remove the end cap that holds the hammer spring?

Also: Is there any reason to degas the Scorpion before adjusting the hammer spring tension?

Most versions are glued on on need heat to remove.kelly


Top
 Profile  
 
PostPosted: Fri Sep 26, 2014 10:50 pm 
Offline
User avatar

Joined: Fri May 09, 2014 12:07 pm
Posts: 35
Location: Elora ON
Next question - what's the preferred method of applying the heat... To prevent damage to any internals?

_________________
Daystate MK4 IS, scope Hawke SideWinder 30 8-32x56
BSA Ultra SE


Top
 Profile  
 
PostPosted: Fri Sep 26, 2014 11:56 pm 
Offline

Joined: Sat Feb 28, 2009 12:28 pm
Posts: 662
Bistro wrote:
Next question - what's the preferred method of applying the heat... To prevent damage to any internals?

electric heat gun


Top
 Profile  
 
PostPosted: Tue Sep 30, 2014 6:58 pm 
Offline
User avatar

Joined: Fri May 09, 2014 12:07 pm
Posts: 35
Location: Elora ON
kelly1 wrote:
Bistro wrote:
Next question - what's the preferred method of applying the heat... To prevent damage to any internals?

electric heat gun


Thanks! Thinking about adding a Huma regulator to the BSA Ultra SE and one of the adjustment steps is to remove rear cover.

_________________
Daystate MK4 IS, scope Hawke SideWinder 30 8-32x56
BSA Ultra SE


Top
 Profile  
 
PostPosted: Tue Sep 30, 2014 8:15 pm 
Offline

Joined: Sat Feb 28, 2009 12:28 pm
Posts: 662
Bistro wrote:
kelly1 wrote:
Bistro wrote:
Next question - what's the preferred method of applying the heat... To prevent damage to any internals?

electric heat gun


Thanks! Thinking about adding a Huma regulator to the BSA Ultra SE and one of the adjustment steps is to remove rear cover.

You will need to degas even if it is r 10 style,is this gun like a sportman or dynamax or mor the r 10 style?..kelly


Top
 Profile  
 
PostPosted: Wed Oct 01, 2014 8:34 pm 
Offline
User avatar

Joined: Fri May 09, 2014 12:07 pm
Posts: 35
Location: Elora ON
Yes, comfortable with all the steps, except the 'heating' part... The Ultra is likely a shorter version of the Scorpion, similar action to the R10.
Huma has a decent description of the install procedures here:
http://huma-air.com/wp-content/uploads/ ... BSA-SE.pdf

_________________
Daystate MK4 IS, scope Hawke SideWinder 30 8-32x56
BSA Ultra SE


Top
 Profile  
 
PostPosted: Sat Oct 04, 2014 9:36 am 
Offline
User avatar

Joined: Fri May 09, 2014 12:07 pm
Posts: 35
Location: Elora ON
UncleWayne wrote:
How do you remove the end cap that holds the hammer spring?

Also: Is there any reason to degas the Scorpion before adjusting the hammer spring tension?


Just found a simple little tool to aid the removal of the end cap on the XTX air site [I was referred to this company by Huma to order one of their regulators].

http://xtxair.com/eshop.php#!/BSA-Hamme ... ry=2849007

_________________
Daystate MK4 IS, scope Hawke SideWinder 30 8-32x56
BSA Ultra SE


Top
 Profile  
 
PostPosted: Sun Oct 05, 2014 7:39 pm 
Offline

Joined: Mon Dec 29, 2008 9:50 pm
Posts: 828
Location: Scotland,Ontario
I did my Dynamax which is similar and didn't have to heat anything, just remove two screws, and cap came rite off.

_________________
Deal with local or small business,they treat you way better than the big chain stores!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO