Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Nov 20, 2019 7:36 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Sep 24, 2014 4:00 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 6016
Location: P.G. B.C.
I am referring to Pacific Tool and Gauge. I've been dealing with Dave Kiff since about the year 2000 for chambering reamers for powder burners. Just odered a new reamer for a project and found they also have specialized reamers for air rifles: here is one link.


https://shop.pacifictoolandgauge.com/in ... ts_id=1237

_________________
Best Wishes
Daryl


Top
 Profile  
 
PostPosted: Wed Sep 24, 2014 5:41 pm 
Offline
User avatar

Joined: Thu Feb 02, 2006 11:35 pm
Posts: 3099
Location: Alberta Canada
Thanks Daryl... :idea: :idea:

_________________
May the cry of the pack be with you upon your hunt

Whitewolf


Top
 Profile  
 
PostPosted: Wed Sep 24, 2014 6:43 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 6016
Location: P.G. B.C.
Welcome Kim - I just ordered a .17Rem Finishing Reamer with floating pilot. It was time I did this. I have the dies (since 2006" when I set the CZ barrel back and rechambered it to .17AH. It shot very well, but I replaced it with a Pac-Nor 3 groove .172 super match. That is the barrel I'm going to re-chamber to .17Rem- afterall, I have over 600rounds of brass and the dies already. Although they make up short-in-the-neck cases and promote throat erosion, I have an unlimited supply of .223 once fired NM brass from the cops using 'our' range. The Pac-Nor barrel has a 4" parallel shank, so i can set it back at least 3 times, giving a potential life of 15,000 rounds - enough for a few years of popping wolves, coyotes and field rats, I guess.

This was a 345yard shot with the .17Rem using a 25gr. HP @ 3,950fps, back in 2005.

Image

_________________
Best Wishes
Daryl


Top
 Profile  
 
PostPosted: Wed Sep 24, 2014 7:25 pm 
Offline

Joined: Tue Aug 20, 2013 8:56 am
Posts: 1079
Location: Calgary, Alberta
Daryl wrote:
Welcome Kim - I just ordered a .17Rem Finishing Reamer with floating pilot. It was time I did this. I have the dies (since 2006" when I set the CZ barrel back and rechambered it to .17AH. It shot very well, but I replaced it with a Pac-Nor 3 groove .172 super match. That is the barrel I'm going to re-chamber to .17Rem- afterall, I have over 600rounds of brass and the dies already. Although they make up short-in-the-neck cases and promote throat erosion, I have an unlimited supply of .223 once fired NM brass from the cops using 'our' range. The Pac-Nor barrel has a 4" parallel shank, so i can set it back at least 3 times, giving a potential life of 15,000 rounds - enough for a few years of popping wolves, coyotes and field rats, I guess.

This was a 345yard shot with the .17Rem using a 25gr. HP @ 3,950fps, back in 2005.

Image


You get a gold star for that shot.

_________________
The flaw with experience is, it causes us to forget what we were like when we didn't have any.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO