Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Nov 20, 2019 1:07 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Feb 27, 2016 9:52 pm 
Offline
User avatar

Joined: Tue Sep 23, 2014 6:30 pm
Posts: 87
Location: Cambridge, Ontario
Hello all,

I am wondering if it is at all possible to convert a 2260 from co2 to pcp by swapping main tube and valve assembly for the disco tube and its assembly.

Would a BNM breech that's made for a 22xx rifle work on the disco tube?

_________________
Thomas

Gletcher NGT-R | Crosman 2240 | Crosman 2240 (Polished) | Frankenrifle (22xx derivative) | Slavia 618
Walther PPK/s | Umarex SA177 | Umarex XBG | Hatsan AT44 | Crosman Vantage | Baikal IJ-22


Top
 Profile  
 
PostPosted: Sun Feb 28, 2016 10:15 am 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 877
Location: North Of Toronto
I've been wondering this to!

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sun Feb 28, 2016 2:29 pm 
Offline
User avatar

Joined: Sun Jul 15, 2012 10:49 am
Posts: 6029
Location: Victoria, BC and Clarkston, WA
Easy peasy!
Just drill the two additional holes to retain the valve body. Create a new valve body neck that has o-rings to keep the air from passing by the valve. You can buy the new end cap that is threaded for a forester fitting. It is a simple as converting a 2240.

_________________
-Rick
Pardini K10
Brocock Concept .22
3 Custom Crosman 2260
Benjamin Discovery .22 w/Joe Hickey stock!
Crosman 150 pistol .22
4 Crosman MK 1 pistol .22
Mrodair CP-1M .22 and .177


Top
 Profile  
 
PostPosted: Mon Feb 29, 2016 12:20 am 
Offline

Joined: Tue Jan 13, 2009 10:54 pm
Posts: 30
Location: Edmonton , Alberta
Hi.

You can always try the JDS Air Man conversion , as on this site http://jdsairman.com/HPAapplications.html


Top
 Profile  
 
PostPosted: Tue Mar 01, 2016 9:20 am 
Offline

Joined: Tue Feb 18, 2014 7:24 pm
Posts: 667
Location: Dowling ,ontario
Short answer is yes. A disco tube and valve as well as the valve retaining screws ,the guage block complete and the fill plug .The bnm breech will mount with no problems. You will have to notch the hammer for the breech retaining screw. Easy peasy.
Depending on how much pressure you want to add to the tube , I would stick with the 2260 tube and the rear half of a disco valve with an extension to go past the stamped lettering in the tube.

_________________
Not quite done collecting


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO